Milwaukee M18 BBPFP2 handleiding
Handleiding
Je bekijkt pagina 23 van 83
44 45ENGLISH
SYMBOLS
Please read the instructions carefully before starting the machine.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the machine.
Always wear eye protection!
Wear a suitable protection mask.
Use protective clothing
Wear gloves!
Wear sturdy non-slip shoes!
Do not expose battery to rain. Do not use battery in damp or wet
locations.
Do not spray fl ammable liquids
Do not spray at people or animals!
Do not spray at a wall!
Do not spray against the wind!
Do not point the nozzle upwards! Only spray downwards!
Store cleaned components dry and frost-free.
Class III electrical protection.
4
x
Remove the battery pack.
Keep electrical contacts clean.
Keep bystanders away when spraying
Hazardous chemicals
Applicable chemical substances
Empty weight (including baseunit,
tank, battery)
Do not dispose of waste batteries, waste electrical and electronic
equipment as unsorted municipal waste. Waste batteries and
waste electrical and electronic equipment must be collected
separately. Waste batteries, waste accumulators and light
sources have to be removed from equipment. Check with your
local authority or retailer for recycling advice and collection point.
According to local regulations retailers may have an obligation
to take back waste batteries and Waste electrical and electronic
equipment free of charge. Your contribution to re-use and recycling
of waste batteries and waste electrical and electronic equipment
helps to reduce the demand of raw materials. Waste batteries, in
particular containing lithium and waste Electrical and electronic
equipment contain valuable, recyclable materials, which can
adversely impact the environment and the human health, if not
disposed of in an environmentally compatible manner. Delete
personnel data from waste equipment, if any.
V
Voltage
Direct Current
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH
TRANSPORTATION AND STORAGE
• Remove the battery pack.
• Ensure that all parts are clean and dry.
• Clean all foreign materials from the product.
• Drain all spray materials from the spray tank before storage and transportation.
• After each use, check all parts of the product for leaks. Return the product to an
authorised service center for repair, if it has any.
• The spray wand can be stored in the cradle.
• For transportation, secure the product against movement or falling to prevent injury
to persons or damage to the product.
• Store the product in a cool, dry and well-ventilated place that is inaccessible to
children. Keep away from corrosive agents such as garden chemicals and de-icing
salts. Do not store outdoors.
PRIMING THE PUMP
Before initial use of either tank or after long term storage, the pump must be primed.
1. Remove tank from base.
2. Fill tank with clear water
3. Install the tank.
4. Install the battery pack. Close and latch the battery compartment.
5. Turn on sprayer, turn the fl ow dial to 5 and begin spraying for up to 30 seconds or
until there is a continuous fl ow.
CLEANING THE TANK
1. Remove the tank from the base and set on a level surface away from the base to
prevent exposing the base to harsh chemicals.
2. Fill the tank about one-third full with clean water
3. Install the tank and spray water until it is completely empty and no more water
comes out. To empty the last bit, tilt the tank 10° towards the hose connection,
return it to a horizontal position and continue pumping until no more water comes
out. Be sure to direct the spray jet at an area that will not be damaged by chemical
residues in the tank.
4. Repeat the procedure with clean water until the tank is thoroughly clean. Wash
outside of nozzles and dry with cloth.
5. Wipe the outside of the tank with a clean, dry cloth.
6. Allow all pieces to completely dry before reinstalling parts and storing the unit.
Always reinsert strainer before replacing tank cap.
MAINTENANCE
Servicing requires extreme care and knowledge and should be performed only be
a qualified service technician. For service we suggest you return the product to an
authorized service center for repair. When servicing, use only identical replacement
parts.
Only make adjustments or repairs described in this manual. For other repairs, contact
an authorised service centre.
After each use, clean the product as prescribed in this manual.
Drain and empty the spray tank before cleaning.
Drain the spray materials through the fi ll area.
Drain all of the spray materials from the spray tank into a container approved for
chemicals. Do not store chemicals in the spray tank.
Use clean water to clean and rinse the spray tank. A small amount of mild household
detergent may be added.
Wipe the product with a clean, dry cloth.
It may be necessary to rinse the spray tank more than once.
Never dispose residual chemicals or contaminated rinsing solutions in waterways,
drains, sewers, street gutters, or manholes.
Dispose residual chemicals and used containers in accordance with local waste
disposal regulations.
Cleaning electrical contacts
Keep electrical contact posts between bottom of tank and base clean. WARNING!
Remove battery pack from tool before cleaning electrical contacts. Clean contacts
with a dry, clean cloth only.
Tank Base
Contacts
Disposal
Never dispose residual chemicals or contaminated rinsing solutions in waterways,
drains, sewers, street gutters, or manholes.
Dispose residual chemicals and used containers in accordance with local waste
disposal regulations.
ACCESSORIES
Use only Milwaukee accessories and spare parts. Should components need to
be replaced which have not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the machine
type printed as well as the six-digit No. on the label and order the drawing at your
local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
BLOCKED NOZZLES
If the nozzles are blocked, immediately turn off the sprayer.
Ensure the battery is removed.
Wear protective clothing such as gloves and eye protection.
Disassemble the nozzles and clean with clear water. Replace defective fi lters.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Low pressure Not enough battery
charge
Charge the battery
No pressure Not enough battery
charge
Charge the battery
Leaky Connections are not
connected properly,
gaskets porous
Retighten connecting
elements, replace sealing
elements
Motor is not
running
Battery empty or
defective
Recharge or replace the
battery
No spray Spray nozzles are
blocked
Clean with compressed air or
a suitable solvent. If screens
or spray heads are damaged,
they should be replaced.
Bekijk gratis de handleiding van Milwaukee M18 BBPFP2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milwaukee |
| Model | M18 BBPFP2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21386 MB |
