Milwaukee M-Spector 2319-20 handleiding
Handleiding
Je bekijkt pagina 4 van 12
4
WARNING
T
o reduce the risk of personal injury
and damage, never immerse your
tool in liquid or allow a liquid to ow inside it.
Cleaning
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use ammable or
combustible solvents around tools.
Repairs
For repairs, return the tool to the nearest authorized
service center.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit www.milwaukeetool.com
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at
www.milwaukeetool.com to receive important
notications regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.877.948.2360
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
LIMITED WARRANTY
USA & CANADA
This MILWAUKEE power tool* is warranted to the original purchaser
from an authorized MILWAUKEE distributor only to be free from
defects in material and workmanship. Subject to certain exceptions,
MILWAUKEE will repair or replace any part on this power tool which,
after examination, is determined by MILWAUKEE to be defective
in material or workmanship for a period of ve (5) years after the
date of purchase unless otherwise noted. Return of the power tool
to a MILWAUKEE factory Service Center location or MILWAUKEE
Authorized Service Station, freight prepaid and insured, is required.
A copy of the proof of purchase should be included with the return
product. This warranty does not apply to damage that MILWAUKEE
determines to be from repairs made or attempted by anyone other
than MILWAUKEE authorized personnel, misuse, alterations, abuse,
normal wear and tear, lack of maintenance, or accidents.
Normal Wear: Many power tools need periodic parts replacement and
service to achieve best performance. This warranty does not cover
repair when normal use has exhausted the life of a part including, but
not limited to, carriage gears, chucks, brushes, cords, saw shoes,
blade clamps, o-rings, seals, bumpers, driver blades, pistons, strikers,
lifters, and bumper cover washers.
*This warranty does not cover battery packs or all power tools. Refer
to the separate and distinct warranties available for those products.
The warranty period for the LED in the LED Work Light (49-24-0171)
and the LED Upgrade Bulb (49-81-0090) is the lifetime of the product
subject to the limitations above. If during normal use the LED or LED
Upgrade Bulb fails, the part will be replaced free of charge.
Warranty Registration is not necessary to obtain the applicable war-
ranty on a MILWAUKEE power tool product. The manufacturing date
of the product will be used to determine the warranty period if no proof
of purchase is provided at the time warranty service is requested.
Camera LED Brightness
Once the tool is turned On, press the power button
to cycle through the 4 levels of brightness or turn
it o. The level of brightness is displayed on the
LCD.
Zoom Button
Press the zoom button to cycle through the 3 zoom
levels. The level of zoom is displayed on the LCD.
180
Rotate Button
Pressing this button
180
rotates the LCD image 180º.
Push the button
180
again to return the image to its
original position.
Battery Level
Replace the batteries when low. The level of battery
is displayed in the upper left corner of the screen.
Sleep Mode
The tool will shut o automatically if unused for 5
minutes.
WARNING
To reduce the risk of explosion,
electric shock and property dam-
age, always check the work area before beginning
a job. Do not allow cable to contact electrical,
chemical, or moving hazards.
Behind walls: Shut o circuit breakers to the
entire area.
Inside Pipes: Ensure there is no electrical charge
to the pipes before beginning inspection. Do not
allow liquid to ow down cable and into tool.
Vehicle use: Turn o the engine and allow to
cool before beginning inspection. Do not allow
the camera or cable to contact oil, gas, or other
corrosive materials.
NOTICE
To reduce the risk of damage to the tool,
do not use excessive force or “kink”
the cable. Do not use in areas where camera and
cable will contact corrosive or oily substances.
Do not use the cable to clear clogs or move ob-
structions. This is not a drain cleaner!
Using the Inspection Camera
1. Adjust the cable to best t the opening.
2. After checking the workspace for hazards, insert
the cable and adjust the lighting as necessary.
MAINTENANCE
WARNING
To reduce the risk of injury, always
remove the batteries from the tool
before performing any maintenance. Never disas-
semble the tool. Contact a MILWAUKEE service
facility for ALL repairs.
Maintaining Tool
Keep your tool in good repair by adopting a regular
maintenance program. After six months to one year,
depending on use, return the tool to a MILWAUKEE
service facility for repairs.
If the tool does not start or operate at full power with
new batteries, clean the contacts on the battery door.
If the tool still does not work properly, return the tool
to a MILWAUKEE service facility for repairs.
Bekijk gratis de handleiding van Milwaukee M-Spector 2319-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Milwaukee |
| Model | M-Spector 2319-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2313 MB |
