Handleiding
Je bekijkt pagina 26 van 36
09
OPERATION INSTRUCTIONS
Inspection Before Start
NOTE
To use the machine for the first time or to re-insert the socket, please pay attention to
check whether the plug and the socket are fitted well.
<Inspection method>
Insert the power plug into the socket and start for use; after about half an hour, turn off
and pull out the plug. Check whether the plug pins are hot; replace the socket if so
(more than about 50°C) to avoid burning the plug or even causing a fire caused by
overheating of the socket due to poor contact.
1 The power cord shall not be damaged or fractured.
2 Please verify the rated current of the power socket is in line with the requirements in
the table above and is equipped with a safety grounding device before use; otherwise,
replace the socket.
Control Panel
DOUBLE BIT
NIXIE TUBE
HEATING
MODE KEY
“ +/- ”KEY
TEMPERATURE
HOUR
ON/STANDBY
KEY
TIMER KEY
<Mode selection>: For work status, press “ ” key to select one of
work modes such as high gear, medium gear and low gear.
Function description
●
●
<Work/Standby>: Plug in the power,the buzzer will “beep” for along
time, press the power key “ ” to enter the heating working state,
and then press the power key “ ” to enter the standby state.
<Shut down>: Under the working state, press the power key “ ” on
the control panel to enter the standby state, unplug the power cord,
wait for the whole machine to cool, and place the heater stably.
1
2
EN
Bekijk gratis de handleiding van Midea NY2513-22MR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | NY2513-22MR |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2012 MB |
