Midea H1-(5-20)-E0 handleiding
Handleiding
Je bekijkt pagina 22 van 32
5.COMMISSIONING
5.1 Double Check
Please double check the following items before running：
• Energy storage, bidirectional DC/DC unit and the base should be completely fixed.
Each BAT+/BAT- line is firmly connected, the polarity is correct, and the voltage
is in line with the accessible range.
• The DC switch of the bidirectional DC/DC unit is OFF, and the running status LED
indicator is OFF.
• Ensure that the communication cable is firmly connected to the terminal resistor.
• Install sealing plugs on unused terminals or interfaces.
• Cable is arranged reasonably, and the cable is tidy and without damage.
5.2 Electrify for the First Time and Start up
• Make sure the device you wish to connect to is powered on. Please follow these
instructions carefully to perform the four power-on steps:
Step 1 Power on the batteries. Turn the DC switch on the bidirectional DC/DC unit to
ON, then press and hold the start button for 5 seconds.
Step 2 Turn the PV switch between the inverter and the PV panels to ON.
21
3. Install the battery protective
cover on the battery module body,
The edge with 3 protruding points
faces up.
1. Assemble the base protective cover
and battery protective cover together.
2. Install the base protective
cover and battery protective
cover on the battery module
body.
4.Install the protective cover of the
energy storage module on its body.
5.Tap the corners of the
protective cover to ensure it is
in place before locking the
screws.
Bekijk gratis de handleiding van Midea H1-(5-20)-E0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | H1-(5-20)-E0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3049 MB |
