Handleiding
Je bekijkt pagina 173 van 180
FP function
(Model RG10E21(2HS)/BGEF)
The unit will operate at high fan speed (while compressor on) with
temperature automatically set to 8 C/46 F.
Note: This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT Mode with
setting temperature of 16 C/60 F to activate FP function.
Press On/O, Mode, Fan and Temp. button while operating will
cancel this function.
2
2s
Cool Flash/Cool/Heat Flash Function
When you press this button in COOL mode, the Cool Flash
function will start. The unit will produce a large volume of air
and high airflow, the temperature of the whole room will be
reduced in a short time.
When you press this button in COOL mode, the Cool Flash
function will start. The unit will produce a large volume of air
and high airflow, the temperature of the whole room will be
reduced in a short time.
When you press this button in HEAT mode, the Heat Flash
function will start. Fast and strong hot airflow will warm up your
whole room in a short time.
Cool/Heat
Flash
Silent Function (some units)
Keep pressing Fan button for more than 2 seconds to activate/
disable silent function. (some units)
Due to low frequency operation of compressor, it may result in
insucient cooling capacity.
51
Bekijk gratis de handleiding van Midea EZ-18RD6-O, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Midea |
| Model | EZ-18RD6-O |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 20817 MB |
