Metra 99-6525HG handleiding
Handleiding
Je bekijkt pagina 2 van 16
99-6525
2
Dash Disassembly
1. Unclip and remove the top half of
the shift knob. (Figure A)
2. Remove (1) T-30 Torx screw
securing the knob and then
remove. (Figure B)
3. Unclip and remove the panel
surrounding the shift knob.
(Figure C)
4. Unclip and remove the climate
control/radio control panel.
Note: The harness removed from
this panel will connect to the
climate extension cable.
(Figure D)
5. Remove (2) Phillips screws
securing the pocket below the
climate control panel, and then
unclip and remove the pocket.
(Figure E)
6. Remove the (4) Phillips screws
securing the radio chassis, and
then unplug and remove it from
the dash cavity. Note: The white
round cable connected to the
radio chassis will connect into
the Axxess interface to drive the
factory display screen.
Continue to kit assembly.
(Figure D)(Figure A)
(Figure C)
(Figure E)(Figure B)
Bekijk gratis de handleiding van Metra 99-6525HG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 99-6525HG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2357 MB |
