Metra 99-5853CH handleiding
Handleiding
Je bekijkt pagina 8 van 24
386.257.1187
|
MetraOnline.com
8
1. Connect the 16-pin harness into port A.
2. Connect the 14-pin harness with stripped leads into port B.
3. Connect the 5853 harness into port C, and then to the wiring harnesses in the vehicle.
4. Port D is a Micro-B USB input for updating the interface.
INSTALLATION PROGRAMMING
1. Open the driver’s door, and keep open during the programming process.
2. Cycle the ignition on and wait until the climate control lights turn blue.
Note: If the lights don’t turn blue, unplug port C from the tactile panel for a few seconds,
then try again.
3. Test all functions of the installation for proper operation, before reassembling the dash.
14-Pin
Harness
Micro-B USB Port
for Updating
16-Pin
Harness
5853
Harness
A
B
C
D
Bekijk gratis de handleiding van Metra 99-5853CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 99-5853CH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2931 MB |
