Megger PAT250 handleiding
Handleiding
Je bekijkt pagina 12 van 42
www.megger.com
PAT250SX
12
Instrument Overview
3.6 User guide INSTRUCTION symbols
Press the button
Connect the P1 test
lead to socket P1 on
the PAT250SX and
the probe to exposed
metalwork Ensure
the probe is NOT
connected to a 230 V
source.
Press and hold for
greater than 0.5
seconds
Connect the P1 test
lead to different
conductive points
on the equipment
under test during the
measurement
Connect the
equipment to
be tested to the
instrument
Connect both the
P1 and P2 test leads
to the circuit to be
measured
Connect the
Instrument to the
mains supply using
the mains plug
test lead (for mains
powered leakage and
RCD testing)
Ensure equipment
under test is switched
ON
3.7 Carry strap fitting and removal
Fitting the carry strap: Removing the carry strap:
Bekijk gratis de handleiding van Megger PAT250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Megger |
| Model | PAT250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7085 MB |
