Megger PAT250 handleiding
Handleiding
Je bekijkt pagina 11 van 42
www.megger.com PAT250SX
11
Instrument Overview
RCD
Residual current device test mode Test Probe P2 to be connected
0˚
180˚
0 º - Positive edge test current
180 º - Negative edge test current
T
Instrument hot, allow to cool
1xI∆N
5xI∆N
1 x I∆n = the rated operating
current of the RCD
5 x I∆n = 5 time the rated operating current
of the RCD
z
Lead null active
F
Warning: Hazardous voltages present
V~
Volts AC P1 test lead null set
s
Seconds
O
Extension lead adaptor lead null set
ms
Thousandths of a second
Earth leakage current measured using the
differential/residual method
RCD – Press TEST or RESET
LN
Phase to Neutral voltage
Touch current measured with P1 test probe
using the direct method
NE
Neutral to Earth Voltage
LE
Phase to Earth voltage Separated Extra-Low Voltage measurement
Volts AC (measurement function)
(English language models) Fixed installation
equipment continuity test
Repeat continuity test Fixed installation equipment continuity test
NOTE : *The PAT250SX range performs various pre-checks prior to testing to ensure the asset is not short-circuit and
is switched on.
3.5 Instrument Buttons
The Class 1, Class 2, Extension lead and RCD buttons will launch test sequences for those appliance types.
Power
button - Hold down for
0.5 second to
switch on,
- Hold down for
2 seconds to
switch off
Abort button - press to stop test or
exit a setup mode
Quick test button
Class 1 button RCD test button
Class 2 button
Setup button – allows access to
PASS limits, test times and
lead null option
Extension lead button Backlight button
Bekijk gratis de handleiding van Megger PAT250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Megger |
| Model | PAT250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7085 MB |
