MDT SCN-P360L3.03 handleiding
Handleiding
Je bekijkt pagina 46 van 65
Technical Manual Presence Detector SCN-x360xx.03
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Telephone: +49-2263-880 • knx@mdt.de • www.mdt.de
46
46
The parameter "Light channels influence brightness measurement" can be used to set whether
several light sources in a room influence each other or not.
Example for setting "Yes": Light channel 1, 2 and 3 react to the basic setting for brightness (general
setting) and switch 3 independent light sources in the room. If, for example, light channel 1 is
switched on via an external button and the brightness value of the switch-on threshold is exceeded,
the other two channels automatically become "brightness-independent" and can therefore also
switch their lamps via motion.
Example for setting "No": If several light sources are switched in a staircase with one detector, but
the positions of these sources have no influence on each other (e.g. indirect LED lighting), each light
group can be set to "Basic setting" of the switch-on threshold. If it is now bright due to daylight and
the switch-on threshold is exceeded, all indirect LED lights should also no longer switch on.
Furthermore, the sending conditions for the measured brightness value can be defined. This can be
sent both at a specific change of (value in %) and cyclically at specific intervals.
Via correction lux value, the measured lux value is shifted by an adjustable percentage offset. Thus,
with a set value of -50%, the measured value is reduced by 50%. Thus, with a measured value of 400
lux and a correction value of -50%, the presence detector would output the value 200.
The reflection factor indicates what percentage of the emitted light is reflected back by the
environment. A value of “1” means that 100% of the emitted light is reflected back. For dark floors, a
reflection factor of 0.25 is usually suitable.
For example, you measure 400 lux at workstation height and only 100 lux under the ceiling. These
are then converted to 400 lux.
Bekijk gratis de handleiding van MDT SCN-P360L3.03, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-P360L3.03 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 0 MB |
