MDT SCN-GLED1W.01 handleiding
Handleiding
Je bekijkt pagina 13 van 34
Technical Manual
LED-Indicator SCN-LED55.01/SCN-GLED1x.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
13
13
Delete alarm
▪ automatically
▪ delete with
attendance
Determining how the alarm to be reset:
Automatic: alarm is reset immediately
when alarm is no longer active
Clear with attendance: The alarm is
cleared only if the absence is turned off
Monitoring for objects
▪ no alarm
▪ send Timeout
alarm at object
failure
Sets whether an alarm should be
triggered when cyclical monitoring for an
LED fails.
Table 3: General settings
The relevant communication objects for the general settings are shown in the following table:
Number
Name
Length
Usage
36
Day/Night
1 Bit
Switching between Day/Night
37
All LEDs – Block object
1 Bit
blocks all LEDs
38
Absent
1 Bit
switches the absent function and so the alarms are
switched on
136
Operating
1 Bit
sends a 1-telegram in the adjusted time periods if the
device is active
Table 4: General communication objects
Bekijk gratis de handleiding van MDT SCN-GLED1W.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-GLED1W.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6536 MB |
