MDT SCN-GLED1W.01 handleiding
Handleiding
Je bekijkt pagina 12 van 34
Technical Manual
LED-Indicator SCN-LED55.01/SCN-GLED1x.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
12
12
4 Reference ETS-Parameter
4.1 General settings
The following figure shows the general settings for the LED display:
Figure 3: General settings
The following table shows the available settings:
ETS-text
Dynamic range
[default value]
comment
Startup time
1s – 60s
[1s]
Time between Reset and functional start
of the device
Send cyclic object operating
▪ not send
▪ 10min – 24h
Adjustment if the operating state should
be send cyclic via an object
Switch Day/Night
▪ Day = 1/Night = 0
▪ Day = 0/Night = 1
Adjustment of the polarity of the
day/night object
Behavior at bus power reset
▪ no read LED
objects
▪ read LED objects
Adjustment if the LED objects should be
read at a reset
Activate alarms
▪ No
▪ Yes
Activation of the alarms
Activate absence
▪ absent at object
value = 0
▪ absent at object
value = 1
Adjustment of the polarity of the
„absent“ telegram
Bekijk gratis de handleiding van MDT SCN-GLED1W.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-GLED1W.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6536 MB |
