MDT BE-TAS5504.01 handleiding
Handleiding
Je bekijkt pagina 56 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
56
56
2 Byte temperature shift
With the 2-byte temperature shift, the Push Button Smart 55/63 sends a 2-byte temperature value
which is added or subtracted from the set basic comfort value.
The Push Button Smart 55/63 sends the shift by the set step width at each keystroke.
In order for the display and the current reference value to be synchronous, the limits of the setpoint
shift have to be specified in the Push Button Smart 55/63 and have to be set to the same values as in
the controller.
The following table shows the available communication objects:
Number
Name
Length
Usage
0
Push buttons 1/2 –
Setpoint shift
2 Byte
Sends the Setpoint shift
1
Push buttons 1/2 –
Status current temperature
2 Byte
Receiving an external temperature for the display
of the current temperature - is only displayed if
the parameter "Use internal temperature value"
is set to "not active"
2
Push buttons 1/2 –
Status current setpoint
2 Byte
Receiving the current setpoint temperature of
the temperature controller; to display the status
3
Push buttons 1/2 –
Status setpoint shift
2 Byte
Receives the current status of setpoint shift from
the controller.
Table 46: Communication objects – Temperature shift via 2 byte
Bekijk gratis de handleiding van MDT BE-TAS5504.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS5504.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
