Handleiding
Je bekijkt pagina 7 van 24
7
DS200
Rear Panel Connections and Switches
1. AC Input uses a Power Cord to connect to an
AC Outlet.
2. Balanced Outputs each use an XLR connec-
tor cable for a balanced output signal.
3. Unbalanced Outputs
use an RCA connector
cable for a xed or adjustable volume level signal.
4. RS232 Connector communicates with
external control devices using a 3.5mm stereo
mini phone plug cable.
5. DATA IN receives operating data from a
McIntosh preamplier or Control Center.
6. Power Control IN receives turn On/O signals
from another McIntosh component.
Power Control OUT sends a turn On/O
signals to another McIntosh component.
7. COAX Inputs (1 and 2) accept coaxial
cables for digital signals.
8. MCT Input transfers signals from McIntosh
products with an MCT connector and is
required for SACD audio.
9. HDMI (ARC) Input connects with a
compatible ARC TV using an HDMI cord to
share control and digital audio connectivity.
Note: The HDMI ARC functionality of the
DS200 is only compatible with ARC TVs.
Other devices like DVD and Blu-ray players
will not work.
10. USB AUDIO Input is a USB Type-B
connector used to connect the DS200 to a
computer to stream digital audio.
11. AES/EBU accept balanced XLR connections
for digital signals.
12. OPTICAL Inputs (1 and 2) accept optical
connections for digital signals.
13. ETHERNET Input for a wired network
connection.
14. SERVICE USB is a USB Type-B port used
for service purposes only.
15. IR INput connects to an IR receiver using a
3.5mm stereo mini phone plug cable.
16. PRE CTRL reserved for future use.
17. ANTENNA - 2 Wi-Fi, 1 Bluetooth
Bekijk gratis de handleiding van McIntosh DS200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | McIntosh |
| Model | DS200 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 4494 MB |