Master-Bilt QS2 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104/ 104

Afdrukken

Je bekijkt pagina 45 van 104

45

8/22 Rev. R 132617 ©2022 Refrigerated Solutions Group. All rights reserved.

WALK-IN MAINTENANCE

Again, MAKE SURE THAT THE POWER IS DISCONNECTED and

remove the cover plate from the pilot light and switch on the front of the

door section. Remove the two screws that attach the pilot light and

switch assembly to the switch box and pull the pilot light and switch

assembly out of the switch box enough to expose the terminal screws

on the device.

Examine the wiring in the switch box and identify the two black leads

from the heater wire that are connected either to two switch terminals

or to one switch terminal and to a wire connector. Refer to the wiring

diagram of the walk-in cooler in the "Electrical Connections" section of

this manual. HINT: After positively identifying the two leads to the heater

wire, cut the leads off, but leave an inch or two remaining on the switch

terminal(s) and/or wire connector. In so doing, these short lengths of

lead will positively identify the proper points of connection

when the replacement heater is installed. Remove the original heater

wire from the jambs and threshold and discard it.

INSTALLATION OF THE REPLACEMENT HEATER

Insert the two lead wires of the replacement heater into the access hole in the heater wire raceway that leads to the

pilot light and switch junction box. NOTE: The section where the lead connects to the heater wire SHOULD NOT

BE BENT! Locate the connector sections as close as possible to the access hole but KEEP THEM STRAIGHT!

Secure the connector sections in place with a short piece of electrical tape.

Temporarily arrange the heater wire assembly.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104/ 104

Bekijk gratis de handleiding van Master-Bilt QS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Koelkast