Martin RUSH Scanner 1 LED handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 22 van 48
22 RUSH™ Scanner 1 LED User Manual
3. On the client fixtures, open the MASTER CLIENT menu and use the
UP and DOWN buttons to select from:
Client 1 – fixture runs the same show as the master fixture, or
Client 2 – fixture runs a show that is synchronized wit
h the master
fixture but is not identical to the master fixture’s show.
4. Press ENTER to confirm your selection.
5. Select a pre-programmed standalone show on the master fixture as
described above.
Sound activation (music trig)
The fixture’s built-in sound activation microphone can be used to trigger scene
changes with a music beat or other sound source when a fixture is running a
standalone show.
To set a chain of fixtures in Master/Client mode to sound activation, you only
need to set up the Master fixture. Client fixtures will synchronize with the
master fixture.
When sound activation is running, the SOUND status LED on the control panel
flashes in sync with the music beat.
To set sound activation:
1. Select SOUND MODE and press ENTER to confirm. The current setting
will blink in the display.
2. Use the DOWN and UP buttons to select ON (sound activation enabled) or
OFF (sound activation disabled).
3. Press ENTER to confirm your selection.
Sound activation microphone sensitivity
To adjust the sensitivity of the sound activation microphone:
1. Play some typical music at the normal volume for the venue.
2. Select SOUND SENSE and press ENTER to confirm. The current setting
will blink on the display.
3. Use the DOWN and UP buttons to change the microphone sensitivity from
0 …100 until the fixture responds well to the music beat.
4. Press ENTER to confirm your selection.

Bekijk gratis de handleiding van Martin RUSH Scanner 1 LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMartin
ModelRUSH Scanner 1 LED
CategorieVerlichting
TaalNederlands
Grootte3279 MB