Martin RUSH Scanner 1 LED handleiding
Handleiding
Je bekijkt pagina 23 van 48
RUSH™ Scanner 1 LED User Manual 23
Focus
Focus during standalone shows can be set for each gobo wheel: wheel 1
(rotating gobos) and wheel 2 (fixed gobos).
To set the focus for the rotating gobo wheel:
1. Select FOCUS ADJUST and press ENTER.
2. Use the DOWN and UP buttons to change the focus point from 0 to 255.
3. Press ENTER to confirm the selected focus point.
To set the focus for the fixed gobo wheel:
1. Select FOCUS 2 ADJUST and press ENTER to confirm.
2. Use the DOWN and UP buttons to change the focus point from 0 to 255.
3. Press ENTER to confirm the selected focus point.
Effects settings
Dimming curves
The fixture has four dimming modes as shown below. The default is MODE 2.
MODE 1 LINEAR. The increase in light intensity appears to be linear as
DMX value is increased.
MODE 2 SQUARE LAW – light intensity control is finer at low levels and
coarser at high levels.
MODE 3 INVERSE SQUARE LAW – light intensity control is coarser at low
levels and finer at high levels.
MODE 4 S-CURVE – light intensity control is finer at low levels and high
levels and coarser at medium levels.
To set the fixture’s dimmer curve:
1. Select DIMMER CURVE and press ENTER to confirm.
2. Use the DOWN and UP buttons to select Mode1, Mode 2, Mode 3 or
Mode 4.
3. Press ENTER to save your selection.
Bekijk gratis de handleiding van Martin RUSH Scanner 1 LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | RUSH Scanner 1 LED |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3279 MB |