Martin RUSH Scanner 1 LED handleiding
Handleiding
Je bekijkt pagina 21 van 48
RUSH™ Scanner 1 LED User Manual 21
Behavior without DMX (DMX State)
The DMX STATE setting determines how the fixture behaves when it is not
receiving a DMX signal. You can set the fixture to enter Show Mode, black out,
or hold the effect it was displaying when the DMX signal stopped. The fixture
is set to BLACKOUT by default.
To adjust the setting:
1. Select DMX STATE and press ENTER.
2. Use the DOWN and UP buttons to select SHOW MODE (fixture enters
Show Mode), BLACKOUT (fixture blacks out) or HOLD (fixture shows the
last effect it was displaying before the DMX signal stopped).
3. Press ENTER to save your selection.
Standalone settings
The fixture will operate in standalone mode if it is not receiving a DMX signal
and the DMX STATE menu option is set to SHOW MODE (see above), or if
you enter the SHOW MODE menu in the control panel.
Standalone show selection (Show Mode)
Nine pre-programmed standalone shows are available. To set the show that
the fixture will run in Show Mode:
1. Select SHOW MODE and press ENTER.
2. Use the DOWN and UP buttons to select a show from 0 to 8.
3. Pres
s ENTER to save your selection.
Master/Client mode
You can sy
nchronize the standalone shows of fixtures on a data link using
Master/Client mode. In this mode, a master fixture runs a preprogrammed
or sound-activated standalone show and the other fixtures run a standalone
show that is either identical to or synchronized with the first fixture.
To set up Master/Client operation:
1. Check that fixtures are link
ed in a chain with a DMX data cable.
2. Set all fixtures in the chain to DMX STATE SHOW MODE, and make
sure that no DMX signal is present on the data link. On one – and only
one – fixture on the link, open the MASTER CLIENT menu and use the
UP and DOWN buttons to set the fixture to MASTER. All the other fixtures
must be set to act as clients. Fixtures’ MASTER and CLIENT LEDs light to
indicate which mode they are operating in.
Bekijk gratis de handleiding van Martin RUSH Scanner 1 LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | RUSH Scanner 1 LED |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3279 MB |