Martin P3 PowerPort 500 IP Install handleiding

Niet gecategoriseerd

Martin

28 pagina's

PDF beschikbaar

Handleiding

Martin

P3 PowerPort 2000 and 500 IP Safety, Installation and User Manual 9

Introduction

Thank you for selecting a product from the Martin P3 PowerPort family. These units supply low voltage

power and data to a wide range of Martin Creative LED fixtures. The following devices are available:

• P3 PowerPort 2000 – IP20, indoor use, 4 hybrid DCE outputs towards fixtures, rack/surface/truss-

mount.

• P3 PowerPort 500 IP Rental – IP65, temporary outdoor use, 1 hybrid DCE output towards fixtures,

rack/surface/truss-mount.

• P3 PowerPort 500 IP Install – IP66, permanent outdoor use, 1 hybrid output towards fixtures, surface-

mount, features service compartment to terminate cables on site.

Additionally, two accessories are available for this ecosystem:

• DCE PSU 240 IP – for powering Martin Creative LED fixtures without the advanced features offered by

the P3 PowerPorts listed above.

• DCE Data Splitter/Booster IP – for extending the distance between a P3 PowerPort and Martin

Creative LED fixtures and/or split chains of fixtures.

See the separate user documentation for these two accessories.

P3 PowerPorts (and connected Martin Creative LED fixtures) are compatible with Art-Net, sACN and the

Martin P3 protocol. They provide local status information via status LEDs and can test the connected

fixtures via integrated test buttons. Additionally, the P3 PowerPorts are able to force the connected

Creative LED fixtures into low-power mode, which enables longer daisy-chains with more fixtures to be

created and reduces the number of P3 PowerPorts required in a given installation.

P3 PowerPorts incorporate a network switch with fail-safe bypass mechanism, enabling easy daisy-

chaining of P3 PowerPorts with zero risk (a P3 PowerPort losing power will not interrupt the network

connection to the P3 PowerPorts chained downstream of it).

P3 PowerPorts support full monitoring and control settings via P3 and RDM over Art-Net.

For possible system layouts when using the P3 PowerPorts with Martin Creative LED fixtures, please see

the user documentation for those products. Martin user documentation is supplied with products and

available for download from the Martin website at www.martin.com , where you can also find the latest

specifications, software/firmware updates and support information for all Martin products.

Unpacking

This user manual is supplied with each product. The following items are also included:

P3 PowerPort 2000

• Safety Cable Attachment Bracket (screws included)

• 2 x Short Rack Mounting Ears (screws included)

P3 PowerPort 500 IP Rental

• Safety Cable Attachment Bracket (screws included)

• 2 x Short Rack Mounting Ears (screws included)

• Long Rack Mounting Ear (screws included)

• Coupling Plate (screws included)

P3 PowerPort 500 IP Install

• Blanking plugs in all pre-installed cable glands

Power input cable

For the P3 PowerPort 2000 and the P3 PowerPort 500 IP Rental, either a mains power cable complete

with Neutrik PowerCON TRUE1 power input connector or a separate Neutrik PowerCON TRUE1 power

input connector should be ordered separately from Martin. For the P3 PowerPort 500 IP Rental the

Bekijk gratis de handleiding van Martin P3 PowerPort 500 IP Install, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.