Martin P3 PowerPort 500 IP Install handleiding

Niet gecategoriseerd

Martin

28 pagina's

PDF beschikbaar

Handleiding

Martin

P3 PowerPort 2000 and 500 IP Safety, Installation and User Manual 7

Do not connect products to mains power in a daisy chain that will exceed the electrical

ratings of any device, cable or connector in the chain.

Check and respect the directions given in the user manuals of all the devices that you intend

to connect to a P3 PowerPort or accessory product. Pay particular attention to the

instructions and warnings that apply to:

• system layout,

• connections to other devices,

• specified cables,

• maximum cable lengths, and

• maximum number of devices that can be connected.

P3 PowerPort 500 and P3 PowerPort 2000 products can supply a safe maximum current of

10 A and safe maximum power of 480 W per hybrid (combined DC power and P3 data)

output. Do not connect a device or a chain of devices to a hybrid output if this safe

maximum current or power limit will be exceeded.

The external diameter of the cables used to connect P3 PowerPort 500 IP Install devices to

power and data must be suitable for the cable glands provided, or water can enter the

product and create a safety hazard or cause damage. The cables must have the following

external diameter:

• AC mains power in, AC mains power THRU: 8-13 mm (0.32-0.51 in.)

• Hybrid (48 VDC power and P3 data) OUT: 6.5-10.5 mm (0.26-0.41 in.)

• P3 data IN, P3 data THRU: 5-8 mm (0.2-0.32 in.)

To connect P3 PowerPort and related devices to AC mains power in a chain, you must use

12 AWG or 2.5 mm

power input and throughput cable that is 16 A rated and temperature-

rated to suit the application. In the USA and Canada the cables must be UL-listed, type SJT

or equivalent. In the EU the cables must be type H05VV-F or equivalent. Suitable cable and

loose Neutrik powerCON TRUE1 TOP connectors are available from Martin (see the P3

PowerPort product pages on the Martin website at www.martin.com)

Connect only Neutrik powerCON TRUE1 TOP cable connectors to the AC mains power

sockets of P3 PowerPort products.

You can connect P3 PowerPort 500 IP Install and P3 PowerPort 500 IP Rental products to

AC mains power in an interlinked daisy chain in which you connect one device’s mains

power THRU socket to the next device’s mains power IN socket, but you must respect the

following limits:

• When operating at 100-120 V~ do not interlink more than three (3) P3 PowerPort 500 IP

devices in total in a daisy chain.

• When operating at 200-240 V~ do not interlink more than five (5) P3 PowerPort 500 IP

devices in total in a daisy chain.

• The P3 PowerPort 500 IP Install can also be operated at 200-277 V~. Do not interlink

more than five (5) P3 PowerPort 500 IP Install devices in total in a daisy chain when

operating this device within this voltage range.

• Regardless of which devices you connect in a daisy chain using a P3 PowerPort 500 IP

device’s THRU socket, do not exceed a total current draw of 16 A for all the devices in

the chain, including the first P3 PowerPort 500 IP device.

The voltage and frequency at the mains power THRU socket are the same as the voltage

and frequency applied to the mains power IN socket. Only connect devices to the mains

power THRU socket that accept this voltage and frequency.

Bekijk gratis de handleiding van Martin P3 PowerPort 500 IP Install, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.