Martin P3 PowerPort 500 IP Install handleiding

Niet gecategoriseerd

Martin

28 pagina's

PDF beschikbaar

Handleiding

18 Martin

P3 PowerPort 2000 and 500 IP Safety, Installation and User Manual

Cables and cable glands

Support the weight of cables to ensure that no length of cable is left hanging from a cable gland. Create

‘drip loops’ so that cables arrive at cable glands from below.

Instructions on correct installation of cables in cable glands are given on the following pages with

reference to the cable gland illustration in Figure 6 on page 19.

Opening the connections compartment

See illustration on right. For access to the connections

compartment, remove the eight screws (arrowed) from the

connections compartment cover on the top of the device, then

remove the cover.

Connecting and setting up the device

To connect the P3 PowerPort 500 IP Install to AC mains power,

network data and the hybrid link of daisy-chained Martin Creative

LED fixtures, first check that the installation is isolated from

mains power and that power cannot be reapplied, then use the

instructions on the following pages.

Figure 5. P3 PowerPort 500 IP Install connections compartment

Bekijk gratis de handleiding van Martin P3 PowerPort 500 IP Install, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.