Martin P3 PowerPort 500 IP Install handleiding

Niet gecategoriseerd

Martin

28 pagina's

PDF beschikbaar

Handleiding

Martin

P3 PowerPort 2000 and 500 IP Safety, Installation and User Manual 17

P3 PowerPort 500 IP Install

Overview

The front panel of the IP66-rated P3 PowerPort 500 IP Install has cable glands that accept the following

diameter cables:

• AC mains power input cable with external diameter 8-13 mm (0.32-0.51 in.)

• AC mains power throughput cable with external diameter 8-13 mm (0.32-0.51 in.)

• Hybrid (48 VDC power and data) output cable with external diameter 6.5-10.5 mm (0.26-0.41 in.)

• Data cable A (in or thru) with external diameter 5-8 mm (0.2-0.32 in.)

• Data cable B (in or thru) with external diameter 5-8 mm (0.2-0.32 in.)

The front panel also features status LEDs and a single button that runs test sequences. If you push and

hold this button, it resets the product.

See illustration on left. The P3 PowerPort 500

IP Install has a pressure equalization valve

(arrowed) on the side of the device. Check this

valve visually from time to time. If it appears to

be dirty, consult Martin Service for possible

replacement.

Installing

Read the ‘Safety Information’ section starting

on page 5 before installing, applying power to

or operating the device.

To install the P3 PowerPort 500 IP Install, see

illustration on right. Pass high-tensile steel

fasteners that are suitable for the application

and the installation environment through the

four holes (arrowed) in the corners of the

device and tighten them into the installation

surface.

Test/Reset

button

Status LEDs

Mains

THRU

Hybrid

OUT

Data

Pressure equalization

valve

Bekijk gratis de handleiding van Martin P3 PowerPort 500 IP Install, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.