Martin Exterior Projection Pro Compact handleiding

Niet gecategoriseerd

Martin

71 pagina's

PDF beschikbaar

Handleiding

34 Martin

Exterior Projection Pro Compact User Manual, Rev. A

Gobo orientation

It is important to install gobos facing in the correct direction. The orientations shown below are

generally correct, but consult your Martin dealer or gobo supplier if you are in any doubt about the

orientation of a specific gobo type.

Coated glass gobos

More reflective side towards LEDs

To minimize the risk of gobo overheating and

damage, turn the more reflective side of a

coated gobo towards the lamp.

Less reflective side away from LEDs

The less reflective side of a coated gobo will be

more resistant to heat damage if it faces away

from the lamp.

Image/text gobos

True image towards LEDs

Reversed image away from LEDs

Gobos that have a specific left/right orientation (such as text gobos) will appear correctly in the

projection if they appear correctly when viewed from the LED light source side.

Structured glass gobos

Flat side towards goboholder

Textured glass gobos such as the Ripple gobo supplied with the 4-slot gobo wheel accessory sit

most squarely in a goboholder with the flat side placed down against the goboholder. In the Exterior

Projection Pro Compact, the structured side of the gobo must face towards the LEDs. If in doubt,

consult your Martin dealer or gobo supplier.

Bekijk gratis de handleiding van Martin Exterior Projection Pro Compact, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.