Martin Exterior Projection Pro Compact handleiding

Niet gecategoriseerd

Martin

71 pagina's

PDF beschikbaar

Handleiding

Martin

Exterior Projection Pro Compact User Manual, Rev. A 11

Dimming curves

Available using RDM, Martin Companion and the Control / Settings DMX channel

Four dimming curves are available:

• Optically linear– The increase in light intensity appears to be linear as DMX value is increased.

• Square law – (default setting) Light intensity control is finer at low levels and coarser at high levels.

• Inverse square law – Light intensity control is coarser at low levels and finer at high levels.

• S-Curve – Light intensity control is finer at low levels and high levels and coarser at medium levels.

Parameter shortcuts

Available using RDM, Martin Companion and the Control / Settings DMX channel

The Parameter shortcuts option lets you decide whether the four-slot gobo wheel (if installed) and

color wheel should avoid moving past the open position (the default setting) when changing slots or

take the shortest route to the next slot, even if this means crossing the open position.

The default Parameter shortcuts setting is ON.

Cooling fan speed

Available using RDM, Martin Companion and the Control / Settings DMX channel

The Fan speed options let you manage cooling fan operation depending on the importance of fan

noise or light intensity.

• Regulated fan speed, fixed intensity (the default setting) adjusts cooling fan operation to balance

the fixture’s noise and light output characteristics. Cooling fans are set to the lowest speed possible

and then increased as fixture operating temperature rises. If the fixture reaches maximum

operating temperature and full-speed fan operation is not enough to control fixture temperature,

light output intensity is limited to keep the fixture within its operating temperature range.

• Full fan speed, regulated intensity optimizes cooling fan operation for the highest light intensity

by setting cooling fans to run constantly at full speed. Light output intensity is kept at its maximum,

as the LEDs operate at the coolest temperature possible.

• Medium fan speed, regulated intensity sets cooling fans to run constantly at medium speed.

Light output intensity is reduced if necessary to prevent the fixture from exceeding its maximum

operating temperature during medium speed fan operation.

• Low fan speed, regulated intensity sets cooling fans to run constantly at low speed. Light output

intensity is reduced if necessary to prevent the fixture from exceeding its maximum operating

temperature during low speed fan operation.

• Ultra-low fan speed, regulated intensity optimizes cooling fan operation for the lowest possible

noise level by setting cooling fans to run constantly at the lowest possible speed. Light output

intensity is reduced if necessary to prevent the fixture from exceeding its maximum operating

temperature during ultra-low speed fan operation.

Bekijk gratis de handleiding van Martin Exterior Projection Pro Compact, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.