Martin Audio iK41 handleiding
Handleiding
Je bekijkt pagina 37 van 61
Installation
iKON amplifiers are designed to be mounted in standard
19-inch rack enclosures.
If you have a fixed installation, with the bottom unit
supported and no gaps between units, you can just use
the front panel 19-inch rack holes.
If you have a mobile rack, you must support the rear of the
units with rack ears (page 41). Any damage caused by
insufficient rack support is not covered by the warranty.
To prevent damage to the front panel, we recommend
that you fit plastic cups or washers underneath the rack-
mounting bolt heads.
You can mount multiple iKON amplifiers without any
ventilation gaps between them. However, you must make
sure that there is an unobstructed flow of clean air from
the front to the rear of the units. You must not cover the
air intakes on the front of the units or the exhaust vents on
the rear of the units. You must make sure that you aren't
just continually circulating hot air through the amplifiers
from the back of the rack to the front.
The amplifier should never be exposed to rain or moisture
during operation or storage. If the unit does come into
contact with moisture, remove the AC power cable
immediately and leave the unit in a warm location to dry
out.
Note that when equipment is taken from a cold location
to a hot humid one, condensation can form inside the
device. Before you connect the AC power cable, always
allow time for equipment to reach the same temperature
as the surrounding environment
iK41 User Guide
37
Bekijk gratis de handleiding van Martin Audio iK41, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | iK41 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8458 MB |
