Martin Audio iK41 handleiding
Handleiding
Je bekijkt pagina 33 van 61
2. Press the down arrow button ▼ eight times so that
Screen appears top left.
3. Rotate ADJUST (the right-hand dial) to select a screen
contrast between 0 and 100%. You can't edit Check1
and Check2.
4. Press UTILITY to exit the menu.
Recall snapshot
This allows you to recall a saved set of amplifier
settings (page 33). For further details, see Snapshots
(page 15).
To recall a snapshot
1. Press UTILITY.
2. Press the down arrow button ▼ nine times so that
RECL appears top left.
3. Rotate ADJUST (the right-hand dial) to select the
snapshot number (between 1 and 20).
4. Press ENTER.
5. Press ENTER again to confirm or press the down arrow
button ▼ to cancel.
6. Press UTILITY to exit the menu.
Store snapshot
This allows you to save a set of amplifier settings. To recall
the settings, use Recall snapshot (page 33).
You need to store presets before you can
store snapshots.
For further details, see Snapshots (page 15).
To store a snapshot
1. Press UTILITY.
2. Press the down arrow button ▼ ten times so that STOR
appears top left.
3. Rotate ADJUST (the right-hand dial) to select the
snapshot number to use (between 1 and 20).
4. Press ENTER.
5. You can now enter a name for the snapshot (up to 12
characters).
Rotate ADJUST (the right-hand dial) to select each
character. Scrolling right gives A to Z followed by six
symbols followed by a to z in lower case. Scrolling left
gives the numbers 0 to 9 and some symbols.
Rotate SELECT (the left-hand dial) to move forward or
backward in the name.
6. Press
ENTER.
7. Press ENTER again to confirm or press the down arrow
button ▼ to cancel.
8. Press UTILITY to exit the menu.
Static IP address
The IP Static screen allows you to specify the IP address
of the amplifier.
The IP Static screen only appears in
the utility menu if you've selected static
IP using
IP mode (page 33). If you're
using automatic IP, this menu item won't
appear in the utility menu.
To edit the IP address
1. Press UTILITY.
2. Press the up arrow button ▲ twice and check the IP
mode (page 33). If it's auto, change it to static.
3. Press the up arrow button ▲ once so that IP Static
appears top left.
4. Rotate ADJUST (the left-hand dial) to select the part of
the address to edit.
5. Rotate SELECT (the right-hand dial) to update the
address.
6. Press UTILITY to exit the menu.
IP mode
The IP Mode screen allows you to choose static or
automatic IP addressing.
If you're using static IP, the home screen shows the IP
address on the top line as flashing text.
iK41 User Guide
33
Bekijk gratis de handleiding van Martin Audio iK41, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | iK41 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8458 MB |
