Marshall Electronics ML-702 handleiding
Handleiding
Je bekijkt pagina 4 van 7
www.marshall-usa.com
5
6
ML-702-V2 User Manual
www.marshall-usa.com
Menu Settings
Press MENU knob on the monitor and function menus will pop-up on the screen.
Rotate left or right to select an option. Then press the knob again to open the sub-
menu. When an arrow pointer appears in the menu, turn the Menu knob again to
accesstheitemorpresstheknobtoconrmaselection.
This page provides controls for typical picture adjustments.
Brightness – used to establish the correct black level in the picture. Default value is 50.
Contrast – establishes the range of dark to light areas in the picture. Default value is 50.
Saturation – sets the amount of color information in the picture. Default value is 50.
Tint – this function is designed to remove color errors in composite analog (NTSC, PAL)
signals. A better choice for component and digital signals is to use Color Temp / User
to establish the correct color tones. Tint control is only available when VIDEO input is
selected. Default value is 50.
Sharpness – adds synthetic “detail” to the image. HD images should require very little
added sharpness. Default value is 0.
Color Temp – this setting provides three different presets for white balance
approximating different common color “temperatures”.
USER allows for custom calibration by adjusting Gains and Offsets as desired:
R/G/B Gain – Adjust the R/G/B Gain of the current Color Temperature from 0 to 255.
Default value is 128.
R/G/B Offset – Adjust the R/G/B Offset of the current Color Temperature from 0 to 511.
Default value is 256.
2. MARKER
This page offers controls for setting various on-screen markers.
Center Marker – places a “+” mark in the exact center of the display.
(Useful for checking camera or graphics positioning.)
Aspect Marker – places borders on screen representing various typical video and
cinema aspect ratios. This does not change the displayed aspect ratio. (That setting is
in the Video menu.)
Safety Marker – places a border around the edge of the screen to be used as a guide
during video production.
Marker Color – the Center, Aspect and Screen marker colors can be changed here.
Grid – On-screen grid lines are useful when matching camera shots or during editing.
When Grid is turned on, Center, Aspect and Safety markers will not appear.
Marker Mat – darkens the background just behind the markers for visibility. When Grid
is turned on, Center, Aspect and Safety markers will not appear.
Thickness – sets the width of the markers. Adjust as desired for best visibility.
ITEMS OPTIONS
Brightness 0~100
Contrast 0~100
Saturation 0~100
Tint 0~100
Sharpness 0~100
Color Temp. 6500K / 7500K / 9300K / *User
Red gain 0 ~128~255
*When User is selected,
these Gain and Offset
adjustments will appear in
the menus.
Green gain 0~128~255
Blue gain 0 ~128~255
Red offset 0 -256-511
Green offset 0-256-511
Blue offset 0 -256-511
Exit
ITEMS OPTIONS
Center marker Off/On
Aspect marker Off /16:9 / 1.85:1 / 2.35:1 / 4:3 / 3:2
Safety marker Off / 95% / 93% / 90% / 88% / 85% / 80%
Marker color Red / Green / Blue / White / Black
Grid O ff / On
Aspect Mat. 0ff / 1 / 2 / 3 / 4 / 5 / 6 / 7
Thickness 1~7
Exit
1. PICTURE
Bekijk gratis de handleiding van Marshall Electronics ML-702, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marshall Electronics |
| Model | ML-702 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3552 MB |