Marshall CV630-WI handleiding
Handleiding
Je bekijkt pagina 20 van 24
37 38
CV630-BI/WI/ND3/ND3W
User Manual
No Item Function Descriptions
1 DHCP
Network setting of camera. Change of setting is available when DHCP
function is closed.
2 HTTP Port Set HTTP port. The default Port value is 80
3 HTTPS Port Set HTTPS port. The default Port value is 81
4
Tracking Data
Output
When enabled, PTZ position information can be reported when the camera
moves
1. Serial Output: Please set the protocol to VISCA and the baud rate to
38400
2. IP output: Set the IP address and port
3. The port numbers should be > 1024. 1935, 8555, 8556, 8557 cannot be
used.
<Remark> When Tracking Data Output is enabled, the camera performance
may be affected.
6.2.6 System – Network
1
2
3
4
6.2.7 System – Date & Time
Function Descriptions
Enable/disable 802.1x protocol, and configure settings when enabled
<Remark> The router must support 802.1x protocol to enable this feature
Function Descriptions
Display date and time of the current camera/PC. You may set the synchronization method and modify date
and time
www.marshall-usa.com
Bekijk gratis de handleiding van Marshall CV630-WI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marshall |
| Model | CV630-WI |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9948 MB |
