Makita DTC303 handleiding
Handleiding
Je bekijkt pagina 10 van 144
10
ENGLISH
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may dier slightly
from the actual capacity.
NOTE: The rst (far left) indicator lamp will blink when
the battery protection system works.
Applicable compression range
Applicable compression
range
Opening between nibs:
32 mm
Specications
Nominal output 60 kN
Oil capacity 78 ml
Electric motor DC motor
Dimension (mm) D398 × H298 × W81
Weight 5.3–5.7 kg
The weight may dier depending on the attachment(s),
including the battery cartridge. The lightest and heaviest
combination are shown in the table.
How to use the tool
Attaching the battery pack
1. While pressing the latch, pull out the battery pack.
To replace the battery pack, push the new pack
rmly into place.
2. After sliding a battery pack on, check if it is securely
in place by pulling it gently. Do not press the latch
when pulling the battery.
1
► 1. Latch
Select Auto retract / Manual
Auto retract is a function to automatically retract the ram
to the original position after completing compression.
The Auto retract function is set to ON at shipment.
To set the function to manual, remove the cover and set
the direction of the groove
using a at-head driver.
To set the function to ON again, change the direction of
the groove to
.
1
2
3
4
► 1. Cover 2. OFF 3. ON 4. Groove
Trigger & Release knob
The ram advances when the trigger is pulled.
Keep pulling the trigger until it reaches the set load.
Then, the ram automatically retracts to the lower end.
To stop the ram at the desired position, tap the trigger
once. (Auto retract mode)
To retract the ram manually, press the release knob.
The ram continues to retract while the release lever is
pressed. (Manual and Auto retract mode) Pressing the
operation switch operates the motor of the tool and
raises the piston.
1
2
► 1. Release knob 2. Trigger
Bekijk gratis de handleiding van Makita DTC303, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | DTC303 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20506 MB |
