Makita DTC303 handleiding
Handleiding
Je bekijkt pagina 9 van 144
9
ENGLISH
Battery
Battery
• At the time of purchase, the battery protection function
may be activated due to the battery not being suciently
charged. (Please be careful because this product may
start operating if you operate the switch.) Correctly
charge the battery with the rapid charger before use.
• Attach the battery cover when not using the product. It
will help protect the battery from water and dust.
• When not using the product for a long period, store it
with the battery removed.
To increase the life of the battery
• When you sense that the force of the tool has become
weak, stop use and charge the battery.
• Do not recharge a battery that is fully charged.
• Charge the battery in an ambient temperature range
of 10°C to 40°C.
• When the battery has become hot such as immediately
after use, we recommend inserting it into the charger to
cool and charge it.
• When a lithium-ion battery will not be used for a long
period of time (at least 6 months), we recommend
charging and then storing it.
Battery collection
• Used batteries are collected for recycling. Please
take the battery to the store where you purchased the
product or a Makita sales oce.
Recycle the lithium-ion
battery
Recycle the lithium-ion
battery
How to attach and detach the battery
WARNING:
Insert the battery into the product properly. If the
red part at the top of the button is visible, the
battery is not fully locked into place. Firmly insert
the battery until all of the red part cannot be seen.
• If the battery is not inserted suciently, it may detach
and cause an accident.
• To detach the battery from this product, A. hold down
the button on the battery front and B. slide the battery
to remove it.
• When attaching the battery, align the battery with the
grooves in the product and then insert it all the way by
performing the procedure in reverse. If the red part at
the top of the button is visible at this time, the battery is
not fully locked into place. Insert the battery properly all
the way until all of the red part cannot be seen.
A
1
2
3
B
► 1. Button 2. Red part 3. Battery
Indicating the remaining battery capacity
Only for battery cartridges with an indicator
1
2
► 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indicate
the remaining battery capacity. The indicator lamps light
up for a few seconds.
Indicator lamps Remaining
capacity
Lighted O Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
Bekijk gratis de handleiding van Makita DTC303, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | DTC303 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20506 MB |
