Makita DBN900 handleiding

100 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 100
14 ENGLISH
NOTE:Useadryclothtowipethedirto󰀨thelens
of the lamp. Be careful not to scratch the lens of the
lamp, or it may lower the illumination.
NOTE:Thetoolmaynotdrivenailsafterthebattery
becomeslowonpowerevenwhilethelampremains
lit.Inthiscase,chargethebatterycartridge.
ASSEMBLY
CAUTION: Always make sure that your
ngers are not placed on the switch trigger or
the contact element and the battery cartridge is
removed before carrying out any work on the
nailer.
Loading or unloading the nails
CAUTION: Always make sure that the battery
cartridge is removed before loading the nails.
Unintentionalringmaycausepersonalinjuriesand
property damage.
CAUTION: Be careful not to get your ngers
caught in the magazine. The nail pusher tends to
springbacktoitsoriginalpositionunlessyoutakethe
counteraction.
NOTICE: Gently slide the nail pusher along the
magazine.Aforcefulcontactbetweenthenailpusher
and nail strip may damage the nails.
1. Removethebatterycartridge.
2. Insert a nail strip into the slit of the magazine.
Make sure to align the outlines of the nail heads with
that of the slit.
►Fig.9: 1. Slit 2. Nail head outline
3. Pinch the pusher lever to raise the pusher plate
upabovethenailstriploaded.Thenpullthenailpusher
towards the slit.
►Fig.10: 1. Pusher lever 2. Nail pusher
4. Set the pusher lever free and slide the nail pusher
backbyreleasingthespringtensionsafely.
►Fig.11: 1. Pusher lever 2. Nail pusher
NOTICE: Make sure that the nail strip is properly
aligned in the magazine and secured with the
pusher plate.
If not, try reloading.
NOTICE: Do not use deformed nails and nail
strips. Use nails specied in this manual. Using
nailsotherthanthosespeciedmaycausenailjam-
ming and malfunction.
►Fig.12
To remove nails, follow the installation procedures in
reverse.
►Fig.13
Installing extended capacity
magazine
Optional accessory
CAUTION: Always make sure to unload all
the nails left in the magazine and remove the
battery cartridge from the tool before installing an
extended capacity magazine.
Use a large-capacity magazine attachment so the tool
carries more nails.
1. Loosenandremovetheboltsthatsecurethe
magazine using the hex wrench.
►Fig.14: 1. Magazine 2. Bolts
2. Lift the free end of the standard equipped maga-
zine slightly and pull it straight out.
►Fig.15: 1. Standard equipped magazine
3. Insert the lock plate in the extended capacity
magazine into the lock groove in the driver guide at an
angle.Aligntheboltholesinthemagazinewiththosein
thedriverguide.Thentightentheboltsalittleatatime
using the hex wrench.
►Fig.16: 1. Extended capacity magazine 2. Lock
plate 3. Lock groove 4. Driver guide 5. Bolt
holes
4. Tighten the extended capacity magazine on the
toolbodywiththebolt.
5. Retightenalltheboltsuptosecuretheextended
capacity magazine.
►Fig.17: 1. Extended capacity magazine 2. Bolts
Nose adapter
CAUTION: Always make sure that your n-
gers are not placed on the switch trigger or the
contact element, and remove all the nails left in
the magazine and the battery cartridge before
attaching or detaching the nose adapter.
Whenringnailsonthematerialwitheasily-marred
surfaces, attach the nose adapter onto the contact top.
Attaching nose adapter
1. Lightly place the nose adapter over the contact
top.
2. Release the switch trigger.
3. Placethecontactelementatonthematerialthat
canbedamaged.
4. Push the contact element through until the nose
adaptersecurelytsontothecontacttop.
►Fig.18: 1. Nose adapter 2. Contact top
NOTE: Make sure that the hooked arm ends of the
nose adapter fully engage the contact top.
►Fig.19: 1. Hooked arm ends
Detaching nose adapter
1. Turn the tool upside down.
2. Disengage the arms of the nose adapter from the
contact top and slide the nose adapter out of the
assembly.

Bekijk gratis de handleiding van Makita DBN900, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMakita
ModelDBN900
CategorieNiet gecategoriseerd
TaalNederlands
Grootte15904 MB