Makita DBN900 handleiding
Handleiding
Je bekijkt pagina 13 van 100
13 ENGLISH
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
Pressthecheckbuttononthebatterycartridgetoindi-
catetheremainingbatterycapacity.Theindicatorlamps
light up for a few seconds.
►Fig.3: 1. Indicator lamps 2.Checkbutton
Indicator lamps Remaining
capacity
Lighted O Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
Thebattery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambienttemperature,theindicationmaydierslightly
from the actual capacity.
NOTE:Therst(farleft)indicatorlampwillblinkwhen
thebatteryprotectionsystemworks.
Power switch action
CAUTION: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
Pressandholdthemainpowerbuttontoturnonthe
tool. The power indicator lights up.
Toturnothetool,pressandholdthemainpower
buttonuntilthepowerindicatorgoeso.
NOTE: The switch design varies depending on your
region of residence.
►Fig.4: 1.Mainpowerbutton2. Power indicator
NOTE:Thetoolcannotbeturnedonwhileeitherthe
switch trigger or the contact element is actuated. Be
sure to release the switch trigger and the contact
elementbeforeturningonthetool.
NOTE:Thetoolcannotbeturnedowhiledriving
nails.
NOTE: The main power switch will automatically shut
down if the tool is left unattended for an extended
duration.
Selecting actuation mode
Country specic
NOTE:Onlyasinglenailingmodeisavailablein
some regions or countries. The switch design varies
depending on your region of residence.
The tool employs a selective-actuation triggering. Press
andshortlyholdtheactuationmodeswitchbuttonto
select the desired actuation mode.
►Fig.5: 1.Actuationmodeswitchbutton
2. Sequential actuation mode lamp
3. Contact actuation mode lamp
Mode
switch
Actuation
mode
Feature
Full sequen-
tial actuation
Drive one nail in one sequential
operation.Suitablefordrivinga
nail carefully and accurately and
helpful when you require precise
fastener placement.
Contact
actuation
Either a single nailing or continu-
ousnailingisavailable.Preferred
when you require high productive
fastener placement.
:Unavailableinsomeregionsandcountries.
NOTE:Actuationmodecannotbeswitchedtoanother
while either the switch trigger or the contact element
is actuated.
Adjusting the nailing depth
WARNING: Always make sure that your
ngers are not placed on the switch trigger or
the contact element and the battery cartridge is
removed before adjusting the depth of nailing.
Turntheadjustertoadjustthenailingdepth.Thenailing
depthgetsdeeperasyouturntheadjustertoAdirec-
tion,shallowertoBdirectioninthegure.Therangeof
thenailingdepthadjustmentis8.5mm.
►Fig.6: 1.Adjuster
NOTICE: Do not turn the adjuster too much, or
the adjuster may get stuck.
Adjustthenailingdepthasnecessary.
►Fig.7: 1. Too deep 2. Flush 3. Too shallow
Lighting up the lamp
CAUTION: Do not look in the light or see the
source of light directly.
Pull the switch trigger or actuate the contact element to
light up the lamp. The lamp keeps on lighting while pull-
ing the switch trigger or actuating the contact element.
The lamp goes out approximately 10 seconds after
releasing the switch trigger and the contact element.
►Fig.8: 1. Lamp
Bekijk gratis de handleiding van Makita DBN900, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | DBN900 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15904 MB |
