Makita DBN900 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100/ 100

Afdrukken

Je bekijkt pagina 12 van 100

12 ENGLISH

high-voltage electrical power lines, do not use

the battery cartridge near high-voltage electri-

cal power lines. It may result in a malfunction or

breakdownofthetoolorbatterycartridge.

18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Useofnon-genuineMakitabatteries,orbatteriesthat

havebeenaltered,mayresultinthebatterybursting

causingres,personalinjuryanddamage.Itwill

also void the Makita warranty for the Makita tool and

charger.

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

2. Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery

service life.

3. Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let

a hot battery cartridge cool down before

charging it.

4. When not using the battery cartridge, remove

it from the tool or the charger.

5. Charge the battery cartridge if you do not use

it for a long period (more than six months).

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched o󰀨 and the battery cartridge is removed

before adjusting or checking function on the tool.

Installing or removing battery

cartridge

CAUTION: Always switch o󰀨 the tool before

installing or removing of the battery cartridge.

CAUTION: Hold the tool and the battery car-

tridge rmly when installing or removing battery

cartridge.Failuretoholdthetoolandthebattery

cartridgermlymaycausethemtoslipo󰀨yourhands

andresultindamagetothetoolandbatterycartridge

andapersonalinjury.

Toinstallthebatterycartridge,alignthetongueonthe

batterycartridgewiththegrooveinthehousingandslip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator as

showninthegure,itisnotlockedcompletely.

Toremovethebatterycartridge,slideitfromthetool

whileslidingthebuttononthefrontofthecartridge.

►Fig.1: 1. Red indicator 2. Button 3. Battery cartridge

CAUTION: Always install the battery cartridge

fully until the red indicator cannot be seen. If not,

itmayaccidentallyfalloutofthetool,causinginjuryto

you or someone around you.

CAUTION: Do not install the battery cartridge

forcibly. If the cartridge does not slide in easily, it is

notbeinginsertedcorrectly.

Tool / battery protection system

Thetoolisequippedwithatool/batteryprotectionsys-

tem.Thissystemautomaticallycutso󰀨powertothe

motortoextendtoolandbatterylife.Thetoolwillauto-

maticallystopduringoperationifthetoolorbatteryis

placed under one of the following conditions:

►Fig.2: 1. Lamp 2. Power/mode indicator

* The switch design varies depending on your

region of residence.

Protection status indication

Lamp Power/mode

indicator

Status

On Blinking On Blinking

Overheat

Over

discharge

Overheat protection

Whenthetool/batteryisoverheated,thetoolstopsauto-

matically providing status indication. In this situation, let

thetool/batterycoolbeforeturningthetoolonagain.

Overdischarge protection

Whenthebatterycapacitybecomeslow,thetoolstops

automatically.Inthiscase,removethebatteryfromthe

toolandchargethebattery.

Protections against other causes

Protection system is also designed for other causes

that could damage the tool and allows the tool to stop

automatically. Take all the following steps to clear the

causes,whenthetoolhasbeenbroughttoatemporary

halt or stop in operation.

1. Turnthetoolo󰀨,andthenturnitonagainto

restart.

2. Chargethebattery(ies)orreplaceit/themwith

rechargedbattery(ies).

3. Letthemachineandbattery(ies)cooldown.

Ifnoimprovementcanbefoundbyrestoringprotection

system, then contact your local Makita Service Center.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100/ 100

Bekijk gratis de handleiding van Makita DBN900, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Makita (Niet gecategoriseerd)

Handleiding bekijken

Makita 197235-3

Niet gecategoriseerd - handleiding

Handleiding bekijken

Makita CA5000

Niet gecategoriseerd - handleiding

Handleiding bekijken

Makita BL3622A

Niet gecategoriseerd - handleiding

Handleiding bekijken

Makita DBN601

Niet gecategoriseerd - handleiding

Handleiding bekijken

Makita DBN610

Niet gecategoriseerd - handleiding

Handleiding bekijken

Makita DHP490

Niet gecategoriseerd - handleiding

Handleiding bekijken

Makita DDF490

Niet gecategoriseerd - handleiding

Handleiding bekijken

Makita DFJ214

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd