Magewell Pro Convert SDI 4K Plus handleiding

Niet gecategoriseerd

Magewell

79 pagina's

PDF beschikbaar

Handleiding

Setting SmartEDID

NOTE: This function is available for Pro Convert HDMI Plus/4K Plus products.

EDID

Click and enter the EDID tab to check the EDID information. By clicking Reset to Default in the bottom right corner of the page, you can cancel your settings.

This tab is only available for HDMI products.

SmartEDID

■

SmartEDID is enabled by default. When it is disabled, other related

functions can not be set.

■

Depending on the input capability of the converter and that of the

device connected to the loop-through interface, the converter will

smartly select to send the EDID to the video source device, to ensure

both the converter and the loop-through device can obtain the signal

they support.

■

Keep last

■

Keep the last EDID value used.

■

This function is disabled by default. To enable it, the SmartEDID function

should also be enabled. When Keep Last is enabled and the loop-

through device is disconnected, the current EDID will still be used. The

converter will continue receiving signal so the video capture and

encoding continues. Otherwise, the converter will resend its EDID to the

source device for it to redetermine what format of signal to send. As a

result, there could be an interruption to the source signal for a short

time.

■

Bekijk gratis de handleiding van Magewell Pro Convert SDI 4K Plus, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.