Livarno Lux IAN 367062 handleiding
Handleiding
Je bekijkt pagina 14 van 87
14 GB/CY
the self-adhesive tape
9
may not
stick properly.
1. Using a pencil, mark the position
on the cupboard, shelf or cabin
et
on to which you intend to attach
the LED lightstrip
1
. If neces-
s
ary, use a spirit level as a guide.
2. Stick the double-sided adhesive
tape
9
onto the LED lightstrip
1
. Then pull the paper from
the self- adhesive tape
9
on the
back of the LED lightstrip
1
.
3. Position the self-adhesive tape
9
on the markings and press
to fix it firmly into place (Fig. D).
4. Connect the lightstrip
1
with
mains adapter
8
by using
one of the below methods.
5. Connect with the other LED
lightstrip
1
(Fig. C) directly or
by using connection lead
2
when needed (Fig. B).
6. Connect the end cap
11
to the
end of the lightstrip
1
(Fig. H).
7. Insert the cable clip
10
to the
cable, pull the paper of adhe-
sive pads which behind the clip
and press to fix it firmly onto
the cupboard (Fig. H).
Method 1:
Drill a hole across the cupboard:
ø approx. 22 mm.
Put the connector
6
and in-
line switch
7
through the
drilled hole and connect to the
lightstrip
1
(Fig. H).
Bekijk gratis de handleiding van Livarno Lux IAN 367062, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 367062 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4401 MB |
