Livarno Lux IAN 367062 handleiding
Handleiding
Je bekijkt pagina 13 van 87
13 GB/CY
that you do not strike any elec-
trical cables, gas or water pipes
in the vicinity of where you are
drilling. If necessary, check the
area using a suitable detector
before you drill.
Before installation, check whether
the substrate is suitable for the
fastening clips and can support
the weight of the product. If you
are unsure about any aspects
of this step, please seek the ad-
vice of an electrical equipment
specialist.
Do not use any sharp and / or
pointed objects, such as wire,
nails or clamps, to fasten the
product in place.
Avoid bending the product.
Otherwise the insulation could
be damaged.
Installation
The LED lightstrip
1
can be con-
nected using a connection lead
2
(Fig. B) or without a connection
lead (Fig. C).
Mounting the product
on a cupboard
Note: Thoroughly clean the surface
on to which you intend to install the
product. The surface must be clean,
dry and free of grease. Otherwise
Bekijk gratis de handleiding van Livarno Lux IAN 367062, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 367062 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4401 MB |
