Livarno Lux IAN 354292 handleiding
Handleiding
Je bekijkt pagina 28 van 37
28 GB/MT
Initial use / Installing the LED strip / Maintenance and cleaning / Disposal
Avoid the risk of fatal injury
from electric shock
Check the LED strip for damage before every
use. Never use the LED strip if any damage is
detected.
A damaged mains cable poses a risk of fatal
injury from electrical shock. In the case of dam-
age, repairs or other problems, please contact
the service centre or a qualified electrician.
The supply cable of this appliance cannot be
replaced. If the cable is damaged, the appliance
must be disposed of. The appliance contains
no parts which may be serviced by the consumer.
Make sure before use that the available supply
voltage corresponds to the required operating
voltage of the item (see “Technical data“).
Never allow the live power leads and contacts
to come into contact with water or other liquids.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
Do not install the LED strip on damp or conductive
surfaces.
This LED strip must not be connected electroni-
cally with other LED strips.
The illuminant in this LED strip cannot be replaced.
If the LED strip has reached the end of its ope-
rating life, the entire LED strip must be replaced.
Avoid excessive bending of the LED strip.
The external flexible cord on this light is not re-
placeable; if the cord is damaged the light must
be disposed of.
Protect the product from sharp edges, mechani-
cal loads and hot surfaces.
Do not secure with sharp staples or nails.
Always unplug the mains plug from the socket
before assembly, disassembly or cleaning.
Never catch hold of the mains plug or the LED
strip with wet hands.
Only use the individual parts supplied, other-
wise all warranty claims will become invalid.
Never connect the LED strip to the power supply
while it is in the packaging. Lay out the item
completely before you connect it to the power
supply.
Do not open or cut open/slit open the light strip.
Do not use the LED strip if it is covered with ob-
jects or is inlaid in a surface.
Prevent fire and
injury hazards
This product does not contain any parts that
can be serviced by the user. The LEDs cannot
be replaced.
The installed LEDs are not suitable
for dimmers or electronic switches.
Do not look into the LED from a close distance
during operation.
Do not look at the LED with an optical instrument
(e.g. magnifier).
Safe working
Do not leave the LED strip or packaging mate-
rial lying unattended. The packaging material
presents a suffocation hazard and there is a
risk of loss of life from strangulation.
Install the light so that it is protected from dirt
and excessive heating.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never use the LED strip if you are having diffi-
culty concentrating or do not feel well.
Before use, familiarise yourself with all the in-
structions and diagrams in these instructions,
as well as with the LED strip itself.
To completely disconnect the LED strip from
the power supply, the mains adapter must be
removed from the mains socket.
Initial use
Remove all packaging materials before first use.
Never connect the LED strip to the mains power
supply whilst in the packaging.
Safety / Initial use
Bekijk gratis de handleiding van Livarno Lux IAN 354292, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 354292 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3583 MB |
