Livarno Lux IAN 345123 handleiding
Handleiding
Je bekijkt pagina 34 van 134
34 GB/IE
Replacing / Inserting batteries (see Fig. A)
Note: Before first use, pull the insulating strip
9
out of the bat-
tery compartment
8
.
If the range of the remote control
4
reduces, the battery
10
needs to be replaced. To do so, slide the battery compartment out
of the remote control
4
. Remove the old battery
10
and insert a
new one.
Note: The correct polarity is indicated on the reverse side of the
remote control
4
.
Slide the battery compartment
8
back into the remote control
4
.
Trimming / connecting the LED tape
The LED tape may be trimmed to size or connected.
DANGER TO LIFE BY ELECTRIC SHOCK!
Disconnect the lights from the power supply before performing any
work on the LED strip
3
. Unplug the mains adapter
2
from the
socket to do so.
Choose the desired LED strip length.
Note: Ensure that you trim the LED strip at the right place. The
cutting point is exactly in the middle of the poles and is marked
with a black line (+ 12 V DC, DI, GND, GND) (see Fig. C).
Trim the LED strip
3
using a pair of scissors.
Then press both ends of the LED strip
3
onto the displacement
contact of the plug connection
11
(see Fig. C). When connecting
the LED strips
3
, pay attention to the correct polarity of the con-
nector (+12 V DC, DI, GND, GND) and to the arrow markings on
the LED strip
3
. The imprinted arrows must point in one direction
(see Fig. C).
Then press one end cap
12
at a time onto the ends of the plug
connection
11
(see Fig. C).
Bekijk gratis de handleiding van Livarno Lux IAN 345123, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 345123 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7563 MB |
