Livarno Lux IAN 331005 handleiding
Handleiding
Je bekijkt pagina 9 van 18
9 GB/IE/NI
cover on the solar cell housing
2
using a
flat-head screwdriver.
Replace the old battery
10
with a new re-
chargeable battery, taking care not to damage
the cables. Please note the polarity when in-
serting the battery. This is shown inside the bat-
tery compartment
9
. Use only rechargeable
batteries of the recommended type (see
“Technical data“).
Close the battery cover and tighten the retaining
screws
8
using a small cross-tip screwdriver.
Set the ON/OFF switch
7
to the “ON“ position.
Reattach the solar cell housing
2
to the lamp
shade
1
. Then assemble the remaining parts
of the lamp.
Charging
Please note, the solar garden light must be switched
on when the battery is charging. The charging time
via the solar cell varies by the intensity of the sunlight
and the incidence angle of light onto the solar cell.
Place the solar cell as perpendicular as possible to
incidence angle of light. This will ensure the brightest
light.
Maintenance and cleaning
The LEDs cannot be replaced. The solar lamp is
maintenance-free, except for any necessary change
of battery.
Routinely clean the solar light with a dry, lint-
free cloth. Use a slightly moist cloth if very dirty.
Troubleshooting
Note: The device contains sensitive electronic
components. Radio transmitting equipment in the
immediate vicinity may therefore cause interfer-
ence. If you notice the device is malfunctioning,
remove any sources of interference from the area
around the device.
Note: Electrostatic discharge can cause malfunc-
tions. In the event of such malfunctions, briefly
remove and reinsert the rechargeable batteries.
Error Cause Solution
The light will not
switch on even
though the sun
shone on the
lamp all day.
Artificial sourc-
es of light, e.g.
street lighting,
is interfering
with the light.
Place the light in
a location where
it will not be af-
fected by other
light sources.
The light does
not come on or
comes on only
briefly.
The rechargea-
ble battery is
broken or the-
re was not
enough day-
light.
Replace the bat-
tery or install the
light in a location
where it has gre-
ater exposure to
sunlight.
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
Do not dispose of electrical
equipment in the household
waste!
Faulty or used batteries / rechargeable batteries
must be recycled in accordance with Directive
2006/66/EC and its amendments. Please return
Bekijk gratis de handleiding van Livarno Lux IAN 331005, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 331005 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1881 MB |
