Livarno Lux IAN 290627 handleiding
Handleiding
Je bekijkt pagina 10 van 26
10 GB/IE/NI
A beep will sound and the first field in the date
display will flash.
9. U
se the / button
9
to set the current mo
nth.
10. Press the Select button
7
to confirm the entry.
A beep will sound and the second field in the
date display will flash.
11. Use the
/ button
9
to set the current date.
12. Press the Select button
7
to confirm the entry.
The date and time have been set.
The
symbol in the function display will stop
flashing and stay on.
Operation
Use the flexible lamp arm
2
to adjust the
LED lamp.
Press and hold the ON / OFF button
4
for
2 seconds to switch the backlight
3
on / off.
Switching the lamp on or off
The lamp has three brightness settings:
1. Touch the ON / OFF button
4
once to switch
on the LED lamp
1
.
2. Touch the ON / OFF button
4
a second time
to increase the brightness.
3. Touch the ON / OFF button
4
a third time to
increase the brightness more.
4. Touch the ON / OFF button
4
a fourth time to
switch the LED lamp
1
off.
Switching the alarm on and off
Activate the alarm (see “Activating the alarm“).
The alarm will sound at the set time and the
LED lamp
1
will switch on.
Touch the ON / OFF button
4
to silence the
alarm and the LED lamp
1
.
With the snooze function activated, the
symbol will appear in the function display. The
alarm will sound again after the set snooze
time (max. 2 x).
Activating the alarm
Press the Mode button
6
to switch from time
mode to alarm mode. A beep will sound and the
symbol will appear in the function display
14
.
The time
15
and date display
16
show the cur-
rent alarm time or current date, respectively.
If applicable, press the / button
9
several
times to activate or disable the respective function:
• symbol appears in the function display:
The alarm function is activated.
• symbol
also appears in the function display:
The snooze function is activated.
Press the Mode button
6
to revert from alarm
mode to time mode. A beep will sound. The
symbol will go out and in addition to the
/
symbols for the respective selected functions, the
will appear in the function display.
If no changes are made for 60 seconds, the
display
3
will automatically revert from alarm
mode to time mode.
Setting the alarm time, snooze
time and alarm sound
1. If applicable, press the Mode button
6
to
switch from time mode to alarm mode. A beep
will sound and the
symbol will appear in the
function display
14
. The time display
15
will
show the current alarm time.
2. Press the Select button
7
:
A beep will sound, the top line in the time dis-
play will flash, and the
symbol will flash in
the function display.
3. Use the
/ button
9
to set the hour.
4.
Press the Select button
7
to confirm the setting.
A beep will sound, the bottom line in the time
display will flash, and the
symbol will flash
in the function display.
5. Use the
/ button
9
to set the minute.
6.
Press the Select button
7
to confirm the setting.
A beep will sound, the bottom line in the time
display will flash, and the
symbol will flash
in the function display.
7. Use the
/ button
9
to set the snooze time
(in minutes).
Operation / Cleaning / Storage / DisposalInitial use / Operation
290627_livx_LED-Tischleuchte_Content_GB_IE_NI.indd 10 19.09.17 15:27
Bekijk gratis de handleiding van Livarno Lux IAN 290627, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | IAN 290627 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2139 MB |
