Livarno Lux 14167506L handleiding
Handleiding
Je bekijkt pagina 17 van 117
□ Before installation ensure that the circuit, to which
the light will be connected, is not energised. To do
so, remove the fuse or switch off the circuit breaker
in the fuse box (0 position).
□ Use the 2-pole voltage tester to verify the de-ener
gised status.
● Start-up
● Mounting the light fixture
□ Undo the shade
7
from the base plate
1
by
turning it anti-clockwise.
□ Hold the base plate
1
up to the ceiling and mark
the drill holes using the screw holes provided in the
base plate
1
for the screws
6
.
□
Drill the mounting holes (approx. Ø 6 mm, depth
approx. 40 mm). Make sure that you do not
damage the power cable.
□ Insert the wall plugs
2
into the drill holes. Use a
hammer, if necessary.
□
Attach the base plate
1
to the ceiling with the
screws
6
.
□
Pull the protective tubes
3
over the wires L and N
of the (external) power cable
4
.
□ Connect the (external) power cable
4
with the
screw terminal
5
to the light fixture.
□ Make sure to connect the individual wires of the light
fixture cable with the correspondingly coloured
wires of the power cable (current-carrying
conductor, black or brown = symbol L, neutral
conductor, blue = symbol N, earth conductor,
yellow-green = ).
□
Ensure a tight fit.
□ Attach the shade
7
to the base plate
1
by turning
it clockwise.
□ Replace the fuse or switch on the circuit breaker (I
position) in the fuse box.
Your light fixture is now ready to use.
● Maintenance and cleaning
WARNING! RISK OF ELECTRIC SHOCK!
Disconnect the light from the mains circuit before
cleaning. To do so, remove the fuse or switch off the
circuit breaker in the fuse box (0 position).
WARNING! RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with water or
other liquids, or immerse it in water.
CAUTION! DANGER OF BURNS DUE TO
HOT SURFACES!
Allow the light to cool completely.
■ Do not use solvents, benzene or similar substances.
They could damage the light.
□
Only use a dry, lint-free cloth for cleaning.
□ Replace the fuse or switch on the circuit breaker (I
setting) inside the fuse box.
● Disposal
The packaging is made entirely of recy
clable materials, which you may dispose of
at local recycling facilities.
Observe the marking of the packaging
materials for waste separation, which are
marked with abbreviations (a) and numbers
(b) with following meaning: 1–7: plastics /
20–22: paper and fibreboard / 80–98:
composite materials.
The product and pack
aging are recyclable
and subject to
extended producer responsibility. Please dispose of
them separately according to the symbols on the pack
aging for better waste management. The Triman logo
applies exclusively in France.
To help protect the environment, please
dispose of the product properly when it has
reached the end of its useful life and not in
the household waste. Information on collec
tion points and their opening hours can be
obtained from your local authority.
● Warranty and service
● Warranty
You receive a 36 month warranty on this product, valid
from the date of purchase. The appliance has been
carefully produced under strict quality control. Within
the warranty period we shall rectify without charge all
GB/IE 17
Prior to installation / Start-up / Maintenance and cleaning / Disposal / ...
Bekijk gratis de handleiding van Livarno Lux 14167506L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | 14167506L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11297 MB |
