Livarno Lux 14167506L handleiding
Handleiding
Je bekijkt pagina 16 van 117
maintenance must not be performed by children
without supervision.
Avoid the risk of fatal injury from
electric shock
■ Ensure that a qualified electrician, or a person
trained to carry out electrical installations, performs
the electrical installation.
■ Always check the light, power supply, and mains
cable for damage before plugging it in. Never use
the light if it shows any signs of damage.
WARNING!
A damaged mains cable indicates a life-threatening
danger due to electric shock. In the event of damage,
repairs or other problems with the light please contact
the service centre or a qualified electrician.
■ Prior to installation, remove the fuse or switch off the
circuit breaker (0 setting) in the fuse box.
■ Prior to installation verify the mains voltage on site
corresponds with the operating voltage required for
the light (see “Technical data“).
■
Ensure that the light does not come into contact with
water or other liquids under any circumstances.
■ Never open any of the components of the electrical
equipment or insert any objects into the same
components. This will pose a risk of fatal injury from
electric shock.
■ Do not install the light on a wet or conductive
substrate!
Prevent fire and injury hazards
■ Check the light fixture for damage immediately after
unpacking. If the light fixture is damaged, contact
customer service.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Make sure that the light fixture is turned off and cooled
down before you touch it to prevent burns. Bulbs
generate a lot of heat at the front of the light fixture.
■ The illuminant of this light fixture must only be
replaced by the manufacturer or a technician
appointed by the manufacturer or a similarly quali
fied person.
■ This light is not suitable for external
dimmers or electronic switches.
■ Do not look directly into the light source (light bulb,
LED etc.).
■ Do not use optical instruments to look at the light.
Safe working
■ Mount the light so that it is protected from moisture
and dirt.
■ Carefully prepare for assembly and allow yourself
adequate time. Organise all parts and any neces
sary additional tools or materials before starting so
they are easy to reach.
■ Always be attentive! Always pay attention to what
you are doing and use common sense. Never install
the light if you are having difficulty concentrating or
do not feel well.
● Preparation
● Required tools and material
The tools and materials specified are not included.This
information and these values are non-bindingand are
only provided as a reference.The nature of the material
is determined by theindividual local conditions.
- Pencil / making tool
- 2-pole voltage tester
- Screwdriver
- Electric drill
- Bit (ø 6 mm)
- Side cutting pliers
- Ladder
● Prior to installation
Important: The electrical connection must be estab
lished by a qualified electrician or a person trained to
perform electrical installations. This person must be
familiar with the properties of the light and the connec
tion regulations.
□ Familiarise yourself with all the instructions and
diagrams in this manual, as well as with the light
itself, before you install it.Familiarise yourself with all
the instructions and diagrams in this manual, as well
as with the light itself, before you install it.
16 GB/IE
Safety / Preparation / Prior to installation
Bekijk gratis de handleiding van Livarno Lux 14167506L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Livarno Lux |
| Model | 14167506L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11297 MB |
