Lincoln Electric Prism Wall Mount handleiding

Niet gecategoriseerd

Lincoln Electric

36 pagina's

PDF beschikbaar

Handleiding

B-1

OPERATION

Safety Precautions

The manufacturer does not accept any liability for

damage to the product caused by a failure to follow the

safety and other instructions in this manual, modi-

cations made to equipment or by negligence during

installation, use, maintenance and repair of the product

mentioned in the safety pages of this document and any

corresponding accessories.

Specic working conditions or used accessories may

require additional safety instructions. Immediately

contact your supplier if you detect a potential hazard

when using the product.

The operation of welding fume control

equipment is affected by various factors

including proper use and positioning of the

equipment, maintenance of the equipment

and the specic welding procedure and application

involved. Worker exposure level should be checked upon

installation and periodically thereafter to be certain it is

within applicable federal, state and/or local regulations

and guidelines (i.e. OSHA PEL and ACGIH TLV limits in

the U.S.).

If the product is used in combination with products or machines

mentioned in the introduction of this manual, the safety

instructions in the documentation of these products also apply.

• Routinely inspect the product and check it for damage.

• Use common sense. Stay alert and keep your attention

to your

work. Do not use the product when you are under the

inuence of drugs, alcohol or medicine.

•

Make sure the facility is always sufciently ventilated; this

applies especially to conned spaces.

•

Never install the product in front of entrances and exits which

must be used by emergency services.

•

Make sure that the facility where the equipment is installed

contains sufcient approved re extinguishers.

•

The Prism Wall Mount functions only if the welding fumes

are blown directly through an extraction fan into the lter.

Therefore, never connect the Prism Wall Mount to the

suction opening of the extraction fan.

•

Air containing gases and particles such as OSHA dened

hazardous chemicals, if recirculated, should be tested in

accordance with applicable local, state and federal

regulations and guidelines, such as OSHA PEL.

FUMES and GASES can

be dangerous.

Welding may produce fumes and gases

hazardous to health. Avoid breathing these

fumes and gases.

When welding, keep your head out of the fume. Use

enough ventilation and/or exhaust at the arc to keep

fumes and gases away from the breathing zone. When

welding with electrodes which require special ventilation

such as stainless or hard facing (see instructions on

container or MSDS) or on lead or cadmium plated steel

and other metals or coatings which produce highly toxic

fumes, keep exposure as low as possible and within

applicable OSHA PEL and ACgIH TLv limits using local

exhaust or mechanical ventilation. In conned spaces or

in some circumstances, outdoors, a respirator may be

required. Additional precautions are also required when

welding on galvanized steel.

The operation of welding fume control equipment is

affected by various factors including proper use and

positioning of the equipment, maintenance of the

equipment and the specic welding procedure and

application involved. Worker exposure level should be

checked upon installation and periodically thereafter to

be certain it is within applicable OSHA PEL and ACGIH

TLV.

Fire hazard!

Never use the product for ltering

inammable, glowing or burning particles,

solids or liquids. Never use the product for

ltering of reactive fumes (such as

hydrochloric acid) or sharp particles.

• Avoid using the product for ltering dust

particles which are released when welding

surfaces treated with primer.

• Never use the product without prelter and LongLife

lter cartridge.

WARNING

PRISM

WALL MOUNT

Bekijk gratis de handleiding van Lincoln Electric Prism Wall Mount, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.