Lincoln Electric Prism Wall Mount handleiding

Niet gecategoriseerd

Lincoln Electric

36 pagina's

PDF beschikbaar

Handleiding

B-2

OPERATION

Only use the product for the welding

processes described in the General

Description. Avoid using the product for

extracting and/or ltering fumes and gases which are

released during the following (welding) processes:

• oxy-fuel cutting

• aluminum laser cutting

• oil-treated metal

• arc-air gouging

• oil mist

• paint mist

• heavy oil mist in welding fume

• hot gases (more than 40°C/100°F continuously)

• aggressive gases (e.g. from acids)

• plasma cutting

• grinding aluminum and magnesium

• ame spraying

• extraction of cement, saw dust, wood dust etc.

• sucking cigarettes, cigars, oiled tissues and other

burning particles, objects and acids

• in all situations where explosions can occur

(This list is not comprehensive.)

If the product is used in above situations it could result in

potential re hazard, non-compliance with local

regulations and reduction in product performance and

life.

USERS

This product should only be used by authorized, trained and

qualied users.

INTENDED USE

The product has been designed exclusively for ltering fume

which is released during common weld processes. Using the

product for other purposes is considered contrary to its intended

use. Lincoln Electric accepts no liability for any damage resulting

from such use. Only use the product in mechanically sound

condition in accordance with its intended use and the instructions

set forth in the user manual.

MODIFICATIONS

Modications of this product, other than those specied in this

manual, are not allowed. Modications will void the product

warranty.

OPERATION

The operation description below applies to all versions of the base

unit. The air which contains welding fume is captured, extracted

and ltered, in which the ltered air can be either recirculated or

exhausted.

• First, the welding fume is extracted through one or two

adjustable fume extraction arm(s) by one or two external

extraction fan(s).

• Second, the fan unit(s) exhaust(s) the welding fume via a hose or

duct into the Prism Wall Mount lter unit.

• Third, as the welding fume enters the Prism Wall Mount unit, it

passes through the prelter in the center of the LongLife lter

cartridge. The prelter separates larger particles, debris and

sparks prior to the welding fume entering the LongLife lter.

• Fourth, the welding fume passes through the LongLife lter

cartridge (stabilized).

• Fifth, after passing through the LongLife lter, the ltered air

exits the Prism Wall Mount via the outlet opening(s) at top of unit.

If desired, and local or federal regulations permit, ltered air can

be recirculated back into work environment or exhausted outside

of building.

WARNING

PRISM

WALL MOUNT

Bekijk gratis de handleiding van Lincoln Electric Prism Wall Mount, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.