Lincoln Electric Prism Wall Mount handleiding

Niet gecategoriseerd

Lincoln Electric

36 pagina's

PDF beschikbaar

Handleiding

A-7

INSTALLATION

3. Using a multi-purpose power saw, cut open both outlets of the

lter cover. See Figure A.12.

4. Secure the mounting bracket to the wall. See Figure A.13.

Fasteners not included.

5. Secure the bottom housing onto the mounting bracket.

See Figure A.13.

NOTE: The installation may be made permanent by running two bolts

in through the bottom housing against the mounting bracket (See

Figure A.13).

6. Replace the lter cover and fasten latches.

7. Install the 8 in. sealing rings on both inlets of the base.

8. Fit the 8 in. diameter connection hoses over the sealing rings on

the inlets and secure them with a 8 in. diameter hose clamp. See

Figure A.14.

9. Fit the 8 in. diameter non-return valve into the 8 in. side of the

reducer. See Figure A.15

NOTE: Be aware of the airow direction from fan to lter unit. If non-

return valves are installed backwards, airow will be blocked.

See Figure A-16

10. Fit the other end of the 8 in. hose over the 8 in. diameter side of

the reducer and secure it with an 8 in. diameter hose clamp.

Slide the 6.4 in. side of the reducer over the outlet of the fan and

sealing ring, then secure with 3 sheet metal screws. See gure

A.16.

FIGURE A.12

FIGURE A.14

OUTLET OPENING

FIGURE A.13

8 in. DIAMETER CONNECTION HOSE

INLET

FIGURE A.15

FIGURE A.16

8 in. DIAMETER

NON-RETURN VALVE

HOSE CLAMP

FAN

NON RETURN REDUCER

ASSEMBLY

AIRFLOW DIRECTION

6.3 - 8 in. REDUCER

PRISM

WALL MOUNT

Bekijk gratis de handleiding van Lincoln Electric Prism Wall Mount, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.