Lincoln Electric Oil Guardian handleiding
Handleiding
Je bekijkt pagina 15 van 29
15
OPERATION
VERTICAL DUCT
For the correct mounting position and required duct length,
see Figure 15.
To mount the vertical duct, proceed as follows:
For steps 1-2, see Figure 16.
1. Drill 3 holes Ø 0.16 in. (4 mm) in the vertical duct. See Figure 17.
2. Using three self-tapping screws (A), fasten the vertical duct (B) to
the inlet adapter (C).
For steps 3-5, see Figure 18.
3. Place the transparent hose (D) over the limestone outlet (F).
4. Using the hose clamp (E), secure the transparent hose.
5. Connect the transparent hose with the vertical duct using the heat
shrink tubing (C). Use a heat gun (A) to make it shrink and become
airtight.
Do NOT install damper(s) in the vertical duct to avoid
malfunctioning of the pressure sensors.
ATTENTION
OIL GUARDIAN
™
FIGURE 15
FIGURE 17
FIGURE 16
FIGURE 18
Bekijk gratis de handleiding van Lincoln Electric Oil Guardian, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lincoln Electric |
| Model | Oil Guardian |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5032 MB |
