Handleiding
Je bekijkt pagina 15 van 72
Section 2 Installation
Document #: LIN_EOGO_IOM_24APERION_4605890_Rev1 - 01/24 15
Installation
The instructions that follow are intended as a guide
for preparing for the installation of the Lincoln Aperion
Impinger® oven. First and foremost, each crate should be
examined before signing the Bill of Lading to report any
visible damage by the trucker in transit, and to account for
the proper number of crates.
IF THERE IS APPARENT DAMAGE:
UNITED STATES AND CANADA: Arrangements should be made
to file a claim against the carrier, as Interstate Commerce
Regulations require that the consignee initiate a claim.
ALL SHIPMENTS TO OTHER COUNTRIES: Freight terms will be
developed and extended on an individual basis.
Proper and secure storage facilities should be arranged for
the oven(s). If necessary, protect it from outdoor or damp
conditions at all times before installation.
PACKING AND WEIGHTS
All uncrated components of the Lincoln Aperion Impinger®
oven will pass through a 30" (762 mm) wide door. The
Impinger® Conveyor Oven model weight are the following:
1624 – 330lbs
2024 – 380lbs
2424 – 430lbs
2824 – 480lbs
UNCRATING
When you have all the crates unloaded, open the crates and
remove the plastic covers. Inspect at once for concealed
damage. If anything appears to be damaged, contact the
appropriate persons immediately to file a damage claim.
After completing this inspection, finish unpacking the oven
and all other components. Be sure to remove the packing
cardboard from the plenum shroud. Move all components
inside near the area where they will be assembled in the
order in which they will be assembled.
Installation of Aperion Oven
1. Using multiple people, a crane, or forklift remove the
oven from the crate carefully. (Caution) Do not lift from
the Left and Right Control Boxes.
Left Control Box
Right Control Box
2. Remove Front Door, Upper and Lower Fingers and
Conveyor Assembly from the Top Unit. Removal of these
items will make the installation of the Top Unit on the
Bottom Unit easier to place.
3. Place the oven on temporary blocks
For Countertop Installation
NOTE: Electric ovens on top of a countertop are permitted to
be single or double stack configurations. Gas ovens on top of
a countertop are permitted for single oven configuration.
1. If oven is being placed on a countertop, use the Leg Kit
with Mounting Rings on the Rear Legs of the Unit.
2. If Stacking Option is being used, ensure the Leg Kits are
on the Bottom unit. The Bottom Unit will have the Stack
Top Cover Option installed.
Non-Stacking Cover
With No Holes On
Top
Bekijk gratis de handleiding van Lincoln Aperion 2424, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lincoln |
| Model | Aperion 2424 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 23734 MB |
