Linarie Albi LIN30C2Z handleiding
Handleiding
Je bekijkt pagina 27 van 33
9
Before installing the hob, check that
-
The worktop is square and level, and no structural elements interfere with the space required.
-
The work surface is made from heat-resistant material.
-
If the hob is installed above an oven, the oven is fitted with a built-in cooling fan.
-
The installation will comply with all clearance requirements and applicable standards and regulations.
-
A suitable disconnecting switch allowing total disconnection from the mains supply shall be incorporated into the
permanent wiring, fitted and positioned in accordance with local wiring rules and regulations. The isolating switch
shall be of an approved type and shall provide a contact separation of 3mm air gap in all poles (or in all active
[phase] conductors if local wiring regulations permit this variation of requirements).
-
The isolation switch should be easily accessible to the customer when the hob is installed.
-
If you are in any doubt about installation, consult your local building authorities and regulations.
-
You use finishes that are heat-resistant and easy to clean (such as tiles) for the wall surfaces surrounding the hob.
Once the hob has been installed, check that
-
The power cable is not accessible through cupboard doors or drawers.
-
There is sufficient fresh air flow from the outside of the cabinet to the base of the hob.
-
If the hob is installed above a drawer or cupboard, a thermal protection barrier is fitted under the base of the hob.
-
The disconnector is easily accessible by the customer.
www.linarie.co m.au
Bekijk gratis de handleiding van Linarie Albi LIN30C2Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Linarie |
| Model | Albi LIN30C2Z |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3743 MB |