Handleiding
Je bekijkt pagina 7 van 24
Water pressure:*
bar* MPa*
1.5 to 6.2 0.15 to 0.62
Water pressure when using the water filter:*
bar* MPa*
2.8 to 6.2 0.28 to 0.62
If the pressure is higher than 6.2bar:
u
Fit a pressure reducer.
u
Make the water connection. (see 15 Connecting the appli‐
ance to the water supply*)
7 Transporting appliance
Note when transporting the appliance:
u
Transport the appliance upright.
u
Use two people to transport the appliance.
During first use:
u
Transport the appliance packaged.
When transporting appliances after initial commissioning
(e. g. moving or cleaning):
u
Empty the appliance.
u
Secure the door against unintentional opening.
8 Unpacking the appliance
Before you connect the appliance, report any damage imme‐
diately to the delivery company.
u
Check the appliance and the packaging for damage
during transport. Contact the supplier immediately if you
suspect any level of damage.
u
Remove all materials from the back or the side walls
of the appliance that may prevent proper installation or
ventilation.
u
Remove all protective films from the appliance. Do not
use sharp or pointed objects for this.
9 Mounting wall spacers
With wall spacers, your device achieves the declared energy
consumption and no condensation forms in high ambient
humidity. The device is fully functional without the spacer
brackets, but its energy consumption will be slightly higher.
If you insert the wall spacers, then the device depth
increases by approx.15mm.
u
Appliance with enclosed wall spacers: Insert the wall
spacers on the rear of the appliance at the bottom left
and right.
10 Setting up the appliance
CAUTION
Risk of injury due to heavy appliance!
u
Have two people transport the appliance to its installa‐
tion site.
WARNING
Risk of fire due to short circuit!
u
When you set the appliance up: do not kink, jam or
damage the mains cable.
u
The appliance must not be operated with a defective
mains cable.
WARNING
Danger of injury and damage due to the appliance being
unstable!
The appliance can topple over.
u
Secure the appliance as described in the instructions.
WARNING
Fire hazard and danger of damage!
u
Do not place appliances emitting heat e.g. microwaves,
toasters etc. on the appliance!
Ensure that the following conditions are met:
q
Only move the device when it is not loaded.
q
Only install the appliance with help.
u
Remove the mains cable from the package.
u
Plug the mains cable’s IEC socket completely into the
appliance plug on the back of the appliance. Ensure that
the IEC socket is tight.
u
Use a cord to lay the mains plug to a freely accessible
socket if required.
11 Setting up the appliance so that
it is level
Fig.6
u
Unscrew the adjustable feet Fig. 6 (A) using the enclosed
open-end spanner and a spirit level until the appliance is
firmly aligned and level.
Transporting appliance
* Depending on model and options 7
Bekijk gratis de handleiding van Liebherr SWNsdh 5264 Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SWNsdh 5264 Prime |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6456 MB |
