Handleiding
Je bekijkt pagina 5 van 24
Note
Please contact Customer Services to acquire a kit to limit
the door opening angle to 90° for appliances with soft close
mechanisms.
Ensure that the following conditions are met:
-
Recess dimensions are adhered to .
-
Ventilation requirements are complied with (see 4 Venti‐
lation requirements) .
2.3 Installing multiple appliances
The appliances have been developed for different installa‐
tion methods. If you wish to install several appliances next
to each other or on top of each other, ensure that the
following requirements are met:
q
Only install appliances next to or on top of each other if
they have been developed for this.
q
Observe notices and the following table.
NOTICE
Risk of damage due to condensate!
u
Do not place the appliance directly next to another
cooling/refrigeration unit.
Model Installation method
All
models
Standalone
Models
with a
model
designa‐
tion
starting
with S....
Side-by-Side (SBS)
Models
without
side wall
heating
Next to each other: Install with gapA of 70mm
between the appliances.
Next to each other: Install with gap A of
100mm between the appliances.
If you do not comply with this gap, condensa‐
tion will form on the side walls between the
appliances.
On an exterior wall: Install with gap A as with
installation next to each other.
If you do not comply with this gap, condensa‐
tion may form on the appliance’s side wall.
Models and their installation method
Assemble the appliances according to the separate installa‐
tion instructions.
2.4 Mains connection
WARNING
Danger of fire due to incorrect positioning!
If the mains cable or plug touches the back of the appli‐
ance, the vibration can damage the mains cable or the plug
resulting in a short circuit.
u
Make sure the mains cable is not trapped under the appli‐
ance when you position the appliance.
u
Stand the appliance so that it is not touched by connec‐
tors or main cables.
u
Do not connect any appliances to sockets in the area of
the back of the appliance.
u
Do not place and operate multi-sockets/power distribu‐
tors and other electronic devices (such as halogen trans‐
formers) at the back of the appliances.
3 Installation dimensions
Fig.3
h
a b b` c c` d d`
CN.. 52.. 1855 597
675
x
719
x
609 654
1215
x
1222
x
SCN.. 52..(i) 1855 597
675
x
719
x
609 654
1215
x
1222
x
SBN.. 52..(i) 1855 597
675
x
719
x
609 654
1215
x
1222
x
SWN.. 52..(i) 1855 597
675
x
— 609 —
1215
x
—
CN.. 57..(i) 2015 597
675
x
719
x
609 654
1215
x
1222
x
CBN..
575(i) / 576i
2015 597
675
x
719
x
609 654
1215
x
1222
x
CBN..
578(i) / 579i
2015 597
675
x
— 609 —
1217
x
—
CBN.. 573i 2015 597
675
x
— 609 —
1217
x
—
CBN.. 5773 2015 597
682
x
— 609 —
1217
x
—
CN.. 77..(i) 2015 747
675
x
719
x
759 804
1365
x
1372
x
Installation dimensions
* Depending on model and options 5
Bekijk gratis de handleiding van Liebherr SWNsdh 5264 Prime, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SWNsdh 5264 Prime |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 6456 MB |
